Carbide Straight Edge Corner Angle End Mill, 2-flute / Angle R Type
Brand :
MISUMI
Caution
Product Description
Enables simultaneous machining of corner radius
[Note: Tip diameter D1 is the dimension on a virtual point]
Specifications
[ ! ]Even if dimensions within the specifiable range are specified, depending on the combination of each dimension some products may be unable to be manufactured.
| Model Number | Flute Diameter D 0.005 mm Increment Designation | Corner Angle (Single Angle) θ ° - ' 1' Increment Designation | Tip Diameter D1 0.01 mm Increment Designation | Blade Length ℓ 0.5 mm Increment Designation | Radius * R1 0.1 mm Increment Designation | Radius R2 0.1 mm Increment Designation | Bottom Blade Shape (Selection) | Overall Length L | |
| Shank Diameter d | |||||||||
| BSCACR (For Boss Hole Drilling) | 3 | 0.500 ~ 1.500 | 5° 0' ~ 85° 0' | 0.30 ≤ D1 ≤ (D - 0.2) | 0.5 ~ 5.0 | 0.1 ~ 0.5 | 0 ~ 0.5 | T (Dished) F (Flat) Bottom Blade Shape >>P.608 | 40 |
| 1.505 ~ 2.000 | 0.5 ~ 10.0 | 40 | |||||||
| 2.005 ~ 3.000 | 0.5 ~ 15.0 | 40 | |||||||
| 4 | 2.005 ~ 4.000 | 0.5 ~ 20.0 | 50 | ||||||
| 6 | 3.005 ~ 6.000 | 3.0 ~ 24.0 | 0.1 ~ 0.3 | 0 ~ 0.3 | 60 | ||||
| 8 | 4.005 ~ 8.000 | 4.0 ~ 28.0 | 60 | ||||||
| 10 | 6.005 ~ 10.000 | 5.0 ~ 35.0 | 80 | ||||||
| 12 | 8.005 ~ 12.000 | 6.0 ~ 36.0 | 80 | ||||||
| 16 | 10.005 ~ 16.000 | 8.0 ~ 48.0 | 100 |
| Model Number | Flute Diameter D 0.01 mm Increment Designation | Corner Angle (Single Angle) θ ° - ' 1' Increment Designation | Tip Diameter D1 0.01 mm Increment Designation | Blade Length ℓ 0.5 mm Increment Designation | Radius * R1 0.1 mm Increment Designation | Radius R2 0.1 mm Increment Designation | Bottom Blade Shape (Selection) | Overall Length L | |
| Shank Diameter d | |||||||||
| SCAEMR (For Side / Grooving) | 3 | 0.50 ~ 1.50 | 5° 0' ~ 85° 0' | 0.30 ≤ D1 ≤ (D - 0.2) | 0.5 ~ 5.0 | 0.1 ~ 0.5 | 0 ~ 0.5 | T (Dished) F (Flat) Bottom Blade Shape>>P.608 | 40 |
| 1.51 ~ 2.00 | 0.5 ~ 10.0 | 40 | |||||||
| 2.01 ~ 3.00 | 0.5 ~ 15.0 | 40 | |||||||
| 4 | 2.01 ~ 4.00 | 0.5 ~ 20.0 | 50 | ||||||
| 6 | 3.01 ~ 6.00 | 3.0 ~ 24.0 | 0.1 ~ 0.3 | 0 ~ 0.3 | 60 | ||||
| 8 | 4.01 ~ 8.00 | 4.0 ~ 28.0 | 60 | ||||||
| 10 | 6.01 ~ 10.00 | 5.0 ~ 35.0 | 80 | ||||||
| 12 | 8.01 ~ 12.00 | 6.0 ~ 36.0 | 80 | ||||||
| 16 | 10.01 ~ 16.00 | 8.0 ~ 48.0 | 100 |
* Specify R1 in the range of (D1 - 2 x R1 - 0.1) / 2 ≥ R1.
Alterations
