Carbide Straight Edge Corner Angle End Mill, 2-Flute / Neck Relief Type
Brand :
MISUMI
Caution
Product Description
[Features]
·Corner angle shape neck relief type that achieves efficient processing for deep work
Specifications
[ ! ]Even if dimensions within the specifiable range are specified, depending on the combination of each dimension some products may be unable to be manufactured.
| Model Number | Flute Diameter D 0.01 mm Increment Designation | Corner Angle (Single Angle) θ ° - ' 1' Increment Designation | Angular Width D1 0.01 mm Increment Designation | Blade Length * ℓ 0.5 mm Increment Designation | Neck Length * ℓ1 1 mm Increment Designation | Bottom Blade Shape (Selection) | * Length Under Neck Specified Range ℓ2 | Overall Length L | ||
| Shank Diameter d | ||||||||||
| BSZCAEM | LS-BSZCAEM | |||||||||
| BSZCAEM LS-BSZCAEM (Long Shank) | 4 | 3.01 ~ 4.00 | 5° 0' ~ 85° 0' | 0.10 ≤ D1 ≤ (D - 0.2) / 2 | 3.0 ~ 10.0 | 5 ≤ ℓ1 ≤ 20 | T (Dished) F (Flat) Bottom Blade Shape >>P.608 | ℓ + ℓ1 ≤ 15 | 50 | 80 |
| 6 | 3.01 ~ 6.00 | 3.0 ~ 19.0 | ℓ + ℓ1 ≤ 24 | 60 | 90 | |||||
| 8 | 4.01 ~ 8.00 | 3.0 ~ 23.0 | ℓ + ℓ1 ≤ 28 | 60 | 90 | |||||
| 10 | 6.01 ~ 10.00 | 3.0 ~ 30.0 | ℓ + ℓ1 ≤ 35 | 80 | 120 | |||||
| 12 | 8.01 ~ 12.00 | 3.0 ~ 31.0 | ℓ + ℓ1 ≤ 36 | 80 | 120 | |||||
| 16 | 10.01 ~ 16.00 | 3.0 ~ 43.0 | ℓ + ℓ1 ≤ 48 | 100 | - | |||||
| Model Number | Flute Diameter D 0.01 mm Increment Designation | Corner Angle (Single Angle) θ ° - ' 1' Increment Designation | Angular Width D1 0.01 mm Increment Designation | Blade Length * ℓ 0.5 mm Increment Designation | Neck Length * ℓ1 1 mm Increment Designation | Bottom Blade Shape (Selection) | * Length Under Neck Specified Range ℓ2 | Overall Length L | ||
| Shank Diameter d | ||||||||||
| SZCAEM | LS-SZCAEM | |||||||||
| SZCAEM LS-SZCAEM (Long Shank) | 4 | 3.01 ~ 4.00 | 5° 0' ~ 85° 0' | 0.10 ≤ D1 ≤ (D - 0.2) / 2 | 3.0 ~ 10.0 | 5 ≤ ℓ1 ≤ 20 | T (Dished) F (Flat) Bottom Blade Shape >>P.608 | ℓ + ℓ1 ≤ 15 | 50 | 80 |
| 6 | 3.01 ~ 6.00 | 3.0 ~ 19.0 | ℓ + ℓ1 ≤ 24 | 60 | 90 | |||||
| 8 | 4.01 ~ 8.00 | 3.0 ~ 23.0 | ℓ + ℓ1 ≤ 28 | 60 | 90 | |||||
| 10 | 6.01 ~ 10.00 | 3.0 ~ 30.0 | ℓ + ℓ1 ≤ 35 | 80 | 120 | |||||
| 12 | 8.01 ~ 12.00 | 3.0 ~ 31.0 | ℓ + ℓ1 ≤ 36 | 80 | 120 | |||||
| 16 | 10.01 ~ 16.00 | 3.0 ~ 43.0 | ℓ + ℓ1 ≤ 48 | 100 | - | |||||
* The combined dimensions of the blade length (ℓ) and neck length (ℓ1) will be within the length under neck specified range.
Alterations
