Carbide Straight Edge Taper End Mill, 2-Flute

Specifications

[ ! ]Even if dimensions within the specifiable range are specified, depending on the combination of each dimension some products may be unable to be manufactured.

Model Number		Flute Diameter D 0.005 mm Increment Designation	Single Angle θ ° - ' 1' Increment Designation	Flute Length * ℓ 0.5 mm Increment Designation		Bottom Blade Shape (Selection)	Overall Length L
	Shank Diameter d
				Specified Range	ℓ max.		BSTC	LS-BSTC
BSTC LS-BSTC (Long Shank)	3	0.200 ~ 2.000	0°15' ~ 30°0'	(1) 0.5 ≤ ℓ ≤ D x 4 and (2) ℓ ≤ ℓ max. (refer to table on right) and	8.0	T (Dished) F (Flat) Bottom Blade Shape >>P.608	40	60
	4	0.200 ~ 3.000			12.0		50	80
	6	0.200 ~ 5.000			20.0		60	90
	8	0.200 ~ 7.000			28.0		60	90
	10	0.200 ~ 9.000			35.0		80	120
	12	0.200 ~ 11.000			36.0		80	120
	16	0.200 ~ 15.000			48.0		100	-

Model Number		Flute Diameter D 0.01 mm Increment Designation	Single Angle θ ° - ' 1' Increment Designation	Flute Length * ℓ 0.5 mm Increment Designation		Bottom Blade Shape (Selection)	Overall Length L
	Shank Diameter d
				Specified Range	ℓ max.		STEM	LS-STEM
STEM LS-STEM (Long Shank)	3	0.20 ~ 2.00	0°15' ~ 30°0'	(1) 0.5 ≤ ℓ ≤ D x 4 and (2) ℓ ≤ ℓ max. (refer to table on right) and	8.0	T (Dished) F (Flat) Bottom Blade Shape >>P.608	40	60
	4	0.20 ~ 3.00			12.0		50	80
	6	0.20 ~ 5.00			20.0		60	90
	8	0.20 ~ 7.00			28.0		60	90
	10	0.20 ~ 9.00			35.0		80	120
	12	0.20 ~ 11.00			36.0		80	120
	16	0.20 ~ 15.00			48.0		100	-

* Specify ℓ to meet all of conditions (1), (2), (3).
* Depending on the size of ℓ, the entire gradient angle may be blade length.

Alterations