Carbide Straight Edge Taper Radius End Mill, 2-flute / Chamfering Blade Type

Specifications

STRCMEM / LS-STRCMEM (Long Shank)

Shank Diameter d	Flute Diameter D 0.01 mm Increment Designation	Single Angle θ ° - ' 1' Increment Designation	Radius R 0.01 mm Increment Designation	Flute Length * ℓ 0.5 mm Increment Designation		Chamfer Blade Width * CM 0.1 mm Increment Designation	Bottom Blade Shape (Selection)	Blade Portion ℓ1	Overall Length L
				Specified Range	ℓ max.				STRCMEM	LS-STRCMEM
4	0.50 ~2.50	0°15' ~ 30°0'	0.10 ≤ R ≤ (D - 0.2) / 2	(1) 0.5 ≤ ℓ ≤ D x 4 and (2) ℓ ≤ ℓ max. (refer to table on right) and	10.0	0.5 ≤ CM ≤ *	T (Dished) F (Flat) Bottom Blade Shape >>P.608	ℓ1 = ℓ + CM	50	80
6	0.50 ~4.50				18.0				60	90
8	0.50 ~6.50				26.0				60	90
10	0.50 ~8.50				34.0				80	120
12	0.50 ~ 10.50				36.0				80	120
16	0.50 ~ 14.50				48.0				100	-

* Specify ℓ to meet all of conditions (1), (2), (3).
* Depending on the size of ℓ, the entire gradient angle may be blade length. Maximum Chamfer Blade Width CM (max) = (d - D - tanθ x ℓ x 2) / 2

Alterations