Carbide Straight Edge Taper Corner C End Mill, 2-flute
Brand :
MISUMI
Caution
Product Description
[Features]
·Standard taper shape bottom chamfer edge type
·By specifying alteration, it is possible to select coating suitable for the work material
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Specifications
[ ! ]Even if dimensions within the specifiable range are specified, depending on the combination of each dimension some products may be unable to be manufactured.
| Model Number | Flute Diameter D 0.005 mm Increment Designation | Single Angle θ ° - ' 1' Increment Designation | Corner C 0.01 mm Increment Designation | Flute Length * ℓ 0.5 mm Increment Designation | Bottom Blade Shape (Selection) | Overall Length L | |||
| Shank Diameter d | |||||||||
| Specified Range | ℓ max. | BSTCC | LS-BSTCC | ||||||
| BSTCC LS-BSTCC (Long Shank) | 3 | 0.400 ~2.000 | 0°15' ~ 30°0' | 0.10 ≤ C ≤ (D-0.2) / 2 | (1) 0.5 ≤ ℓ ≤ D x 4 and (2) ℓ ≤ ℓ max. (refer to table on right) and  | 8.0 | T (Dished) F (Flat) Bottom Blade Shape >>P.608 | 40 | 60 |
| 4 | 0.400 ~3.000 | 12.0 | 50 | 80 | |||||
| 6 | 0.400 ~5.000 | 20.0 | 60 | 90 | |||||
| 8 | 0.400 ~7.000 | 28.0 | 60 | 90 | |||||
| 10 | 0.400 ~9.000 | 35.0 | 80 | 120 | |||||
| 12 | 0.400 ~ 11.000 | 36.0 | 80 | 120 | |||||
| 16 | 0.400 ~ 15.000 | 48.0 | 100 | - | |||||
| Model Number | Flute Diameter D 0.01 mm Increment Designation | Single Angle θ ° - ' 1' Increment Designation | Corner C 0.01 mm Increment Designation | Flute Length * ℓ 0.5 mm Increment Designation | Bottom Blade Shape (Selection) | Overall Length L | |||
| Shank Diameter d | |||||||||
| Specified Range | ℓ max. | STCEM | LS-STCEM | ||||||
| STCEM LS-STCEM (Long Shank) | 3 | 0.40 ~2.00 | 0°15' ~ 30°0' | 0.10 ≤ C ≤ (D-0.2) / 2 | (1) 0.5 ≤ ℓ ≤ D x 4 and (2) ℓ≤ℓ max. (refer to table on right) and  | 8.0 | T (Dished) F (Flat) Bottom Blade Shape >>P.608 | 40 | 60 |
| 4 | 0.40 ~3.00 | 12.0 | 50 | 80 | |||||
| 6 | 0.40 ~5.00 | 20.0 | 60 | 90 | |||||
| 8 | 0.40 ~7.00 | 28.0 | 60 | 90 | |||||
| 10 | 0.40 ~9.00 | 35.0 | 80 | 120 | |||||
| 12 | 0.40 ~ 11.00 | 36.0 | 80 | 120 | |||||
| 16 | 0.40 ~ 15.00 | 48.0 | 100 | - | |||||
* Specify ℓ to meet all of conditions (1), (2), (3).
* Depending on the size of ℓ, the entire gradient angle may be blade length.
Alterations
