Carbide Straight Edge Taper Corner C End Mill, 2-flute Chamfering Blade Type

Specifications

Model Number
STCCMEM
[ ! ]Even if dimensions within the specifiable range are specified, depending on the combination of each dimension some products may be unable to be manufactured.

Shank Diameter d	Flute Diameter D 0.01 mm Increment Designation	Single Angle θ ° - ' 1' Increment Designation	Corner C 0.01 mm Increment Designation	Flute Length* ℓ 0.5 mm Increment Designation		Chamfer Blade Width* CM 0.1 mm Increment Designation	Bottom Blade Shape (Selection)	Blade Portion ℓ1	Overall Length L
				Specified Range	ℓ max.
4	0.50 ~ 2.50	0°15' ~ 30°0'	0.10 ≤ C ≤ (D - 0.2) / 2	(1) 0.5 ≤ ℓ ≤ D x 4 and (2) ℓ ≤ ℓ max. (refer to table on right) and	8.0	0.5 ≤ CM ≤ *	T (Dished) F (Flat) Bottom Blade Shape >>P.608	ℓ1 = ℓ + CM	50
6	0.50 ~ 4.50				10.0				60
8	0.50 ~ 6.50				12.0				60
10	0.50 ~ 8.50				14.0				80
12	0.50 ~ 10.50				16.0				80
16	0.50 ~ 14.50				20.0				100

* Please be aware that, depending on the size, chamfer blade width (CM) may not be available.
Maximum Chamfer Blade Width CM (max) = (d - D - tanθ x ℓ x 2) / 2
* Specify ℓ to meet all of conditions (1), (2), (3).
* Depending on the size of ℓ, the entire gradient angle may be blade length.

Alterations