Carbide Straight Edge Taper Corner Angle End Mill, 2-flute / Virtual Point Specification Type
Brand :
MISUMI
Caution
Product Description
[Features]
·Popular taper corner angle shape
Specifications
[ ! ]Even if dimensions within the specifiable range are specified, depending on the combination of each dimension some products may be unable to be manufactured.
| Model Number | Flute Diameter D 0.005 mm Increment Designation | Corner Angle (single angle) *θ1 ° - ' 1' Increment Designation | Angular Width D1 0.01 mm Increment Designation | Single Angle * θ2 ° - ' 1' Increment Designation | Flute Length * ℓ 0.5 mm Increment Designation | Bottom Blade Shape (Selection) | Overall Length L | ||
| Shank Diameter d | |||||||||
| Specified Range | ℓ max. | ||||||||
| BSTCAC (For Boss Hole Drilling) | 3 | 0.400 ~2.000 | 5°0' ~ 80°0' θ1 > θ2 * | 0.10 ≤ D1 ≤ (D - 0.2) / 2 | 0°15' ~ 30°0' θ1 > θ2 * | (1) 0.5 ≤ ℓ ≤ D x 4 and (2) ℓ ≤ ℓ max. (refer to table on right) and  | 8.0 | T (Dished) F (Flat) Bottom Blade Shape >>P.608 | 40 |
| 4 | 0.400 ~3.000 | 12.0 | 50 | ||||||
| 6 | 0.400 ~5.000 | 20.0 | 60 | ||||||
| 8 | 0.400 ~7.000 | 28.0 | 60 | ||||||
| 10 | 0.400 ~9.000 | 35.0 | 80 | ||||||
| 12 | 0.400 ~ 11.000 | 36.0 | 80 | ||||||
| 16 | 0.400 ~ 15.000 | 48.0 | 100 | ||||||
| Model Number | Flute Diameter D 0.01 mm Increment Designation | Corner Angle (single angle) *θ1 ° - ' 1' Increment Designation | Angular Width D1 0.01 mm Increment Designation | Single Angle * θ2 ° - ' 1' Increment Designation | Flute Length * ℓ 0.5 mm Increment Designation | Bottom Blade Shape (Selection) | Overall Length L | ||
| Shank Diameter d | |||||||||
| Specified Range | ℓ max. | ||||||||
| STCAEM (For Side / Grooving) | 3 | 0.40 ~2.00 | 5°0' ~ 80°0' θ1 > θ2 * | 0.10 ≤ D1 ≤ (D - 0.2) / 2 | 0°15' ~ 30°0' θ1 > θ2 * | (1) 0.5 ≤ ℓ ≤ D x 4 and (2) ℓ ≤ ℓ max. (refer to table on right) and  | 8.0 | T (Dished) F (Flat) Bottom Blade Shape >>P.608 | 40 |
| 4 | 0.40 ~3.00 | 12.0 | 50 | ||||||
| 6 | 0.40 ~5.00 | 20.0 | 60 | ||||||
| 8 | 0.40 ~7.00 | 28.0 | 60 | ||||||
| 10 | 0.40 ~9.00 | 35.0 | 80 | ||||||
| 12 | 0.40 ~ 11.00 | 36.0 | 80 | ||||||
| 16 | 0.40 ~ 15.00 | 48.0 | 100 | ||||||
* Specify ℓ to meet all of conditions (1), (2), (3).
* Depending on the size of ℓ, the entire gradient angle may be blade length.
* For the corner angle (single angle) θ1 and single angle θ2, specify the angles such that "θ1 > θ2".
Alterations
