Carbide Straight Edge Taper Corner Angle End Mill, 2-flute / Tip Diameter Specification Type
Brand :
MISUMI
Caution
Product Description
[Features]
·Popular taper corner angle shape tip diameter specified type
Specifications
[ ! ]Even if dimensions within the specifiable range are specified, depending on the combination of each dimension some products may be unable to be manufactured.
| Model Number | Flute Diameter D 0.001 mm Increment Designation | Corner Angle (single angle)* θ1 ° - ' 1' Increment Designation | Tip Diameter D1 0.01 mm Increment Designation | Single Angle * θ2 ° - ' 1' Increment Designation | Flute Length * ℓ 0.5 mm Increment Designation | Bottom Blade Shape (Selection) | Overall Length L | ||
| Shank Diameter d | |||||||||
| Specified Range | ℓ max. | ||||||||
| BSTCADC (For Boss Hole Drilling) | 3 | 1.000 ~ 2.500 | 5°0' ~ 80°0' θ1 > θ2 * | 0.20 ≤ D1 ≤ (D-0.2) | 0°15' ~ 30°00' θ1 > θ2 * | (1) 0.5 ≤ ℓ ≤ D x 4 and (2) ℓ≤ℓmax. (refer to table on right) and  | 10.0 | T (Dished) F (Flat) Bottom Blade Shape >>P.608 | 40 |
| 4 | 1.000 ~ 3.500 | 14.0 | 50 | ||||||
| 6 | 1.000 ~ 5.500 | 22.0 | 60 | ||||||
| 8 | 1.000 ~ 7.500 | 28.0 | 60 | ||||||
| 10 | 1.000 ~ 9.500 | 35.0 | 80 | ||||||
| 12 | 1.000 ~ 11.500 | 36.0 | 80 | ||||||
| 16 | 1.000 ~ 15.500 | 48.0 | 100 | ||||||
| Model Number | Flute Diameter D 0.01 mm Increment Designation | Corner Angle (single angle)* θ1 ° - ' 1' Increment Designation | Tip Diameter D1 0.01 mm Increment Designation | Single Angle * θ2 ° - ' 1' Increment Designation | Flute Length * ℓ 0.5 mm Increment Designation | Bottom Blade Shape (Selection) | Overall Length L | ||
| Shank Diameter d | |||||||||
| Specified Range | ℓ max. | ||||||||
| STCADEM (For Side / Grooving) | 3 | 1.00 ~ 2.50 | 5°0' ~ 80°0' θ1 > θ2 * | 0.20 ≤ D1 ≤ (D-0.2) | 0°15' ~ 30°00' θ1 > θ2 * | (1) 0.5 ≤ ℓ ≤ D x 4 and (2) ℓ≤ℓmax. (refer to table on right) and  | 10.0 | T (Dished) F (Flat) Bottom Blade Shape >>P.608 | 40 |
| 4 | 1.00 ~ 3.50 | 14.0 | 50 | ||||||
| 6 | 1.00 ~ 4.50 | 22.0 | 60 | ||||||
| 8 | 1.00 ~ 7.50 | 28.0 | 60 | ||||||
| 10 | 1.00 ~ 9.50 | 35.0 | 80 | ||||||
| 12 | 1.00 ~ 11.50 | 36.0 | 80 | ||||||
| 16 | 1.00 ~ 15.50 | 48.0 | 100 | ||||||
* Specify ℓ to meet all of conditions (1), (2), (3).
* Depending on the size of ℓ, the entire gradient angle may be blade length.
* For the corner angle (single angle) θ1 and single angle θ2, specify the angles such that "θ1 > θ2".
Alterations
