Carbide Straight Edge Taper Corner Angle End Mill, 2-flute / Chamfering Blade Type

Specifications

[ ! ]Even if dimensions within the specifiable range are specified, depending on the combination of each dimension some products may be unable to be manufactured.

Model Number		Flute Diameter D 0.01 mm Increment Designation	Corner Angle (single angle) θ1 ° - ' 1' Increment Designation	Angular Width D1 0.1 mm Increment Designation	Single Angle θ2 ° - ' 1' Increment Designation	Flute Length * ℓ 0.5 mm Increment Designation		Chamfer Blade Width* CM 0.1 mm Increment Designation	Bottom Blade Shape (Selection)	Blade Portion ℓ1	Overall Length L
	Shank Diameter d
						Specified Range	ℓ max.
STCACMEM	4	0.50 ~ 2.50	5° 0' ~ 85° 0'	0.1 ≤ D1 ≤ (D-0.2) / 2	0°15' ~ 30°0'	(1) 0.5 ≤ℓ ≤ D x 4 and (2) ℓ ≤ ℓmax. (refer to table on right) and	8.0	0.5 ≤ CM ≤ *	T (Dished) F (Flat) Bottom Blade Shape >>P.608	ℓ1 = ℓ + CM	50
	6	0.50 ~ 4.50					10.0				60
	8	0.50 ~ 6.50					12.0				60
	10	0.50 ~ 8.50					14.0				80
	12	0.50 ~ 10.50					16.0				80
	16	0.50 ~ 14.50					20.0				100

* Please be aware that, depending on the size, chamfer blade width (CM) may not be available.
Maximum Chamfer Blade Width CM (max) = (d - D - tanθ x ℓ x 2) / 2
* Specify ℓ to meet all of conditions (1), (2), (3).
* Depending on the size of ℓ, the entire gradient angle may be blade length.

Alterations