Carbide 3/4-Flute Square Alterations End Mill
Caution
Product Description
A multi-functional end mill with 4 simultaneous locations that can be specified
Specifications
■ Table of Standards
Shape Specification for Blade Edge -CR / -CC
| Flute Diameter D (Selection) | -CR / -CC 0.1 mm Increment Designation |
| 4, 4.5 | 0.1 ~ 0.5 |
| 5, 5.5 | 0.1 ~ 0.5 |
| 6 ~7.5 | 0.1 ~ 1.0 |
| 8 ~9 | 0.1 ~ 1.5 |
| 10 | 0.1 ~ 2.0 |
| 11 | 0.1 ~ 2.0 |
| 12 | 0.1 ~ 2.5 |
| 16 ~ 20 | 0.1 ~ 3.0 |
[ ! ]For the standards for the blade length (ℓ) and total length (L), refer to the page for the relevant model number.
[ ! ]Machining the blade edge shape shortens the blade length (ℓ) and the total length (L) by approximately D x 0.5 (up to 5 mm).
Blade Diameter Specification -PP
Shank Additional Processing -KN/-LC
| Flute Diameter D (Selection) | Length Under Neck Specification -KN 1 mm Increment Designation | Total Length Specification -LC 1 mm Increment Designation | Figure |
| 2 ~ 5.5 | KN ≥ ℓ + 5 and KN ≤ L - 23 | LC ≥ ℓ + 10 + 3d | 1 |
| 6 | KN ≥ ℓ + 5 and KN ≤ L - 3d and KN ≤ ℓ + 50 | 2 | |
| 7 | |||
| 7.5 | |||
| 8 | |||
| 9 | |||
| 10 | |||
| 11 | |||
| 12 | |||
| 16 | |||
| 20 |
| Nominal Number | -PP 0.01 mm Increment Designation |
| 4 | 3.70 ~ 3.99 |
| 4.5 | 4.01 ~ 4.49 |
| 5 | 4.51 ~ 4.99 |
| 5.5 | 5.01 ~ 5.49 |
| 6 | 5.51 ~ 5.99 |
| 6.5 | 6.01 ~ 6.49 |
| 7 | 6.51 ~ 6.99 |
| 7.5 | 7.01 ~ 7.49 |
| 8 | 7.51 ~ 7.99 |
| 9 | 8.51 ~ 8.99 |
| 10 | 9.51 ~ 9.99 |
| 11 | 10.51 ~ 10.99 |
| 12 | 11.51 ~ 11.99 |
| 13 | 12.51 ~ 12.99 |
| 16 | 15.51 ~ 15.99 |
| 17 | 16.51 ~ 16.99 |
| 18 | 17.51 ~ 17.99 |
| 20 | 19.51 ~ 19.99 |
| 22 | 21.51 ~ 21.99 |
[ ! ]For the standards for the blade length (ℓ), total length (L), and shank diameter (d), refer to the page for the relevant model number.
[ ! ]When used together, specify the length under neck (KN) and the total length (LC) such that they are in the range given by LC ≥ KN + 3d + 5.
[ ! ]Specifying the length under neck (KN) indicates that the shank clearance diameter will be the blade diameter less 0.2 ~ 0.5 mm.
Specifications/Overview
| Applicable Model Number | Blade length ℓ | Number of flutes | ||
| Gash Land | Sharp-Corner | |||
| TSC-HEM3B | - | Stub | 3 | Click here for product details |
| TSC-HEM3S | TSC-HPEM3S | Short | Click here for product details | |
| TSC-HEM3SR | - | Short Regular | Click here for product details | |
| TSC-HEM3R | TSC-HPEM3R | Regular | Click here for product details | |
| TSC-HEM3L | - | Long | Click here for product details | |
| TSC-LS-HEM3S | - | Long Shank | Click here for product details | |
| TSC-HEM4B | - | Stub | 4 | Click here for product details |
| TSC-HEM4S | TSC-HPEM4S | Short | Click here for product details | |
| TSC-HEM4SR | - | Short Regular | Click here for product details | |
| TSC-HEM4R | TSC-HPEM4R | Regular | Click here for product details | |
| TSC-HEM4L | TSC-HPEM4L | Long | Click here for product details | |
| TSC-LS-HEM4S | TSC-LS-HPEM4S | Long Shank | Click here for product details | |
Alterations
