TiN Coated High-Speed Steel Drill for Difficult-to-Cut Materials, Straight Shank / Regular

Specifications

Model Number
SG-SDR

Diameter D	Groove Length ℓ	Overall Length L	Pack Product Qty
2	24	49	10 Pieces
2.1	24	49	10 Pieces
2.2	27	53	10 Pieces
2.3	27	53	10 Pieces
2.4	30	57	10 Pieces
2.5	30	57	10 Pieces
2.6	30	57	10 Pieces
2.7	33	61	10 Pieces
2.8	33	61	10 Pieces
2.9	33	61	10 Pieces
3	33	61	10 Pieces
3.1	36	65	10 Pieces
3.2	36	65	10 Pieces
3.3	36	65	10 Pieces
3.4	39	70	10 Pieces
3.5	39	70	10 Pieces
3.8	43	75	10 Pieces
4	43	75	10 Pieces
4.1	43	75	10 Pieces
4.2	43	75	10 Pieces
4.3	47	80	10 Pieces
4.5	47	80	10 Pieces
4.8	52	86	10 Pieces
5	52	86	10 Pieces
5.1	52	86	10 Pieces
5.2	52	86	10 Pieces
5.3	52	86	10 Pieces
5.5	57	93	10 Pieces
5.8	57	93	10 Pieces
6	57	93	10 Pieces
6.1	63	101	10 Pieces
6.5	63	101	10 Pieces
6.8	69	109	10 Pieces
6.9	69	109	10 Pieces
7	69	109	10 Pieces
7.8	75	117	5 Pieces
8	75	117	5 Pieces
8.5	75	117	5 Pieces
8.6	81	125	5 Pieces
9	81	125	5 Pieces
10	87	133	-
10.3	87	133	-
10.5	87	133	-
11	94	142	-
12	101	151	-
12.5	101	151	-
13	101	151	-

For Cutting Conditions, Refer to >>Click here.

More Information

●It demonstrates a perfect cutting performance from general steel to stainless steel, and even with difficult-to-cut materials such as titanium, Inconel, and heat-resistant alloys, etc.
●The discharge of cutting chips is promoted by shaping with a strong twist.
●X-model thinning provides a good bite when cutting and the thrust load is reduced significantly.