TiN Coated High-Speed Steel Roll Tap
Caution
Product Description
[Features]
·Used for thread forming that does not generate cutting chip
·Supports a wide range of work materials from general steel to non-ferrous alloys
·Excellent abrasion resistance and chip-weld resistance due to TiN coating
Specifications
Model Number
G-ROT
1 Pack 5 Pieces Included
| Nominal M x P | Chamfer Lcf (Selection) | Precision | Overall Length L | Thread Length Lc | Length Under Neck L1 | Shank Diameter d | Square Part Length Lk | Square Part Width K | Quantity/ pack | |
| M2 | 0.4 | 4 | RM4 | 40 | 9 | - | 3. | 5 | 2.5 | 5 Pieces |
| M3 | 0.5 | 2 4 | RM5 | 46 | 9 | 18 | 4. | 6 | 3.2 | |
| M4 | 0.7 | RM6 | 52 | 10 | 20 | 5. | 7 | 4. | ||
| M5 | 0.8 | RM6 | 60 | 11 | 22 | 5.5 | 7 | 4.5 | ||
| M6 | 1 | RM7 | 62 | 12 | 24 | 6. | 7 | 4.5 | ||
| M8 | 1.25 | RM7 | 70 | 22 | 35 | 6.2 | 8 | 5. | ||
| M10 | 1.5 | RM7 | 75 | 24 | 39 | 7. | 8 | 5.5 | ||
[ ! ]This product is only sold in units of packs.
[ ! ]M6 or below (depth of bite 4 only) have protruding centers.
[ ! ]The pilot hole diameter for a roll tap is different from that of a cutting tap.
[ ! ]For details about roll tapping accuracy RM, refer to the technical information (>>Click here).
For Cutting Conditions, Refer to >>Click here.
More Information
● It is used as a thread forming tap that does not discharge cuttings.
● Supports a wide range of work materials ranging from general steel to non-ferrous alloys.
● The TiN coating provides excellent wear resistance and welding resistance.