TiN Coated High-Speed Steel Point Tap
Brand :
MISUMI
Caution
Product Description
[Features]
·Can be used for through hole machining
·It can handle a wide range of work materials, but is especially effective for tapping steel alloy and stainless steel, etc.
·Excellent abrasion resistance and chip-weld resistance due to TiN coating
·Long shank type ideal for drilling deep thread holes (G-LS-POT)
Specifications
Model Number
G-POT
1 Pack 5 Pieces Included
| Nominal M x P | Chamfer Lcf | Precision | Overall Length L | Thread Length Lc | Length Under Neck L1 | Shank Diameter d | No. of Grooves | Square Part Length Lk | Square Part Width K | Quantity/ pack | |
| M3 | 0.5 | 5P | LM2 | 46 | 11 | 18 | 4 | 3 | 6 | 3.2 | 5 Pieces |
| M4 | 0.7 | LM2 | 52 | 13 | 20 | 5 | 7 | 4 | |||
| M5 | 0.8 | LM2 | 60 | 16 | 25 | 5.5 | 7 | 4.5 | |||
| M6 | 1 | LM2 | 62 | 19 | 28 | 6 | 7 | 4.5 | |||
| M8 | 1.25 | LM3 | 70 | 22 | 35 | 6.2 | 8 | 5 | |||
| M10 | 1.5 | LM3 | 75 | 24 | 39 | 7 | 8 | 5.5 | |||
Model Number
G-LS-POT (Long Shank Type)
| Nominal M x P | Chamfer Lcf | Precision | Overall Length L | Thread Length Lc | Length Under Neck L1 | Shank Diameter d | No. of Grooves | Square Part Length Lk | Square Part Width K | |
| M3 | 0.5 | 5P | LM2 | 100 | 11 | 18 | 4 | 3 | 6 | 3.2 |
| M4 | 0.7 | LM2 | 100 | 13 | 21 | 5 | 3 | 7 | 4 | |
| M5 | 0.8 | LM2 | 100 | 16 | 25 | 5.5 | 3 | 7 | 4.5 | |
| M6 | 1 | LM2 | 100 | 19 | 30 | 6 | 3 | 7 | 4.5 | |
| M8 | 1.25 | LM3 | 150 | 22 | 35 | 6.2 | 4 | 8 | 5 | |
| M10 | 1.5 | LM3 | 150 | 24 | 39 | 7 | 4 | 8 | 5.5 | |
For Cutting Conditions, Refer to >>Click here.
Technical information >>Click here.
More Information
● Used for machining through-holes.
● A large range of work materials can be accommodated, and it is especially well-suited for tapping alloy steel and stainless steel, etc.
● The TiN coating provides excellent wear resistance and welding resistance.
● The long shank model is ideal for machining screw holes in deep locations. (G-LS-POT)