Polishing Tool: Flap with One-touch Screw-on Shaft for Polishing Irregular Surfaces
Brand :
MISUMI
Caution
Product Description
Abrasive paper on flap expands due to centrifugal force when rotated, so it fits shape of workpiece and can also be used for polishing inner surface of hole and flap and versatile rail are single-action replacement.
Specifications
| Model Number | Nominal D1-T | Particle Size (#) (selection) | (1) Flap Section | (2) Mandrel Section | Maximum Operating Rotation Speed (min-1) | Quantity Per Set | |||||||
| Diameter at Rest D1 | Rotating Diameter D2 | Thickness T | Screw Hole M | Screw Diameter M | Screw Length e | Shank Diameter d | Shank Length ℓ | (1) Flap Section | (2) Mandrel Section | ||||
| YCF-SH | 10-10 | 120 240 | 10 | 13 | 10 | M3 | M3 | 11 | 3 | 30 | 20,000 | 10 | 2 |
| 15-15 | 80 120 240 | 15 | 20 | 15 | |||||||||
| 20-5 | 60 80 120 240 | 20 | 26 | 5 | 4 | ||||||||
| 20-15 | 25 | 15 | 11 | ||||||||||
| 25-5 | 25 | 35 | 5 | 4 | |||||||||
| 25-10 | 10 | 11 | |||||||||||
| 25-25 | 33 | 25 | M6 | M6 | 18 | 6 | 38 | ||||||
| 30-10 | 30 | 40 | 10 | 10 | |||||||||
| 30-25 | 38 | 25 | 18 | ||||||||||
| 40-5 | 40 | 52 | 5 | 5 | 35 | 15,000 | |||||||
| 40-10 | 10 | 10 | 38 | ||||||||||
| 40-25 | 25 | 18 | |||||||||||
| 50-10 | 50 | 67 | 10 | 10 | |||||||||
| 50-25 | 65 | 25 | 18 | ||||||||||
[ ! ] This product is sold in units of sets. ● Flap Section 1 Set Unit 10 Pieces Included ● Mandrel Section 1 Set Unit 2 Pieces Included
More Information
● The sand paper on the flap part will spread with centrifugal force as it rotates. It has flexibility and fits to the workpiece shape if you press it since it spreads with centrifugal force.
● It can also be used for hole inside polishing. It can fit to the hole with centrifugal force when machining.
[ ! ] It is applicable to a hole with a diameter larger than its diameter at rest and smaller than its rotating diameter.
● Its flap and mandrel sections can be replaced with one touch. The flap part alone can be replaced without removing the shank from the machine. In addition, it can be easily divided from the metal mandrel when disposing as industrial waste.