XAL Coated Carbide Long Neck Square End Mill, 4-Flute Long Neck Model

Brand :

MISUMI

Caution

Product Description

The price that's only achievable by XAL Series! Introducing the 4-flute long neck

XAL Coated Carbide Long Neck Square End Mill, 4-Flute / Long Neck Model:Related Image

Specifications

Model Number
XAL-PEM4LB (Sharp Edge) / XAL-EM4LB (Standard)

Flute Diameter D	Length Under Neck ℓ1	Standard	Sharp Edge	Blade Length ℓ	Under Neck Diameter d1	Overall Length L	Shank Diameter d	Actual Effective Length Depends on Work Inclination Angle				Figure
Flute Diameter D	Length Under Neck ℓ1	Standard	Sharp Edge	Blade Length ℓ	Under Neck Diameter d1	Overall Length L	Shank Diameter d	30′	1°	2°	3°	Figure
1	4	●	●	1.5	0.95	50	4	4.19	4.4	4.88	5.49	1
	6	●	●					6.28	6.59	7.32	8.24
	8	●	●					8.38	8.79	9.76	10.98
	10	●	●					10.47	10.99	12.21	13.73
	12	●	●					12.57	13.19	14.65	16.48
1.2	6	●	●	1.8	1.15	50	4	6.28	6.59	7.32	8.24	1
	8	●	●					8.38	8.79	9.76	10.98
	10	●	●					10.47	10.99	12.21	13.73
	12	●	●					12.57	13.19	14.65	16.48
	16	●	●					16.75	17.58	19.53	21.97
1.3	6	No Standards	●	1.9	1.25	50	4	6.28	6.59	7.32	8.24	1
1.3	10	No Standards	●	1.9	1.25	50	4	10.47	10.99	12.21	13.73	1
1.4	6	No Standards	●	2.1	1.35	50	4	6.28	6.59	7.32	8.24	1
	8	No Standards	●					8.38	8.79	9.76	10.98
	10	No Standards	●					10.47	10.99	12.21	13.73
	14	No Standards	●					14.66	15.39	17.09	19.22
1.5	6	●	●	2.3	1.45	50	4	6.28	6.59	7.32	8.24	1
	8	●	●					8.38	8.79	9.76	10.98
	10	●	●					10.47	10.99	12.21	13.73
	12	●	●					12.57	13.19	14.65	16.48
	14	●	●					14.66	15.39	17.09	19.22
	16	●	●					16.75	17.58	19.53	21.97
	18	●	●			70		18.85	19.78	21.97	24.71
	20	●	●			70		20.94	21.98	24.41	Without Interference
1.6	6	No Standards	●	2.4	1.55	50	4	6.28	6.59	7.32	8.24	1
	8	No Standards	●					8.38	8.79	9.76	10.98
	10	No Standards	●					10.47	10.99	12.21	13.73
	12	No Standards	●					12.57	13.19	14.65	16.48
	14	No Standards	●					14.66	15.39	17.09	19.22
1.7	6	No Standards	●	2.5	1.65	50	4	6.28	6.59	7.32	8.24	1
1.7	16	No Standards	●	2.5	1.65	50	4	16.75	17.58	19.53	21.97	1
1.8	6	No Standards	●	2.7	1.75	50	4	6.28	6.59	7.32	8.24	1
	8	No Standards	●					8.38	8.79	9.76	10.98
	10	No Standards	●					10.47	10.99	12.21	13.73
	12	No Standards	●					12.57	13.19	14.65	16.48
	14	No Standards	●					14.66	15.39	17.09	19.22
	16	No Standards	●					16.75	17.58	19.53	Without Interference
	20	No Standards	●			70		20.94	21.98	24.41	Without Interference
	25	No Standards	●			70		26.18	27.47	30.51	Without Interference
2	6	●	●	3	1.95	50	4	6.28	6.59	7.32	8.24	1
	8	●	●					8.38	8.79	9.76	10.98
	10	●	●					10.47	10.99	12.21	13.73
	12	●	●					12.57	13.19	14.65	16.48
	14	●	●					14.66	15.39	17.09	19.22
	16	●	●					16.75	17.58	19.53	Without Interference
	18	●	●			70		18.85	19.78	21.97	Without Interference
	20	●	●					20.94	21.98	24.41	Without Interference
	25	●	●					26.18	27.47	Without Interference	Without Interference
	30	●	●					31.41	32.97	Without Interference	Without Interference
2.5	8	●	●	3.8	2.4	50	4	8.38	8.79	9.76	10.98	1
	12	●	●					12.57	13.19	14.65	Without Interference
	16	●	●					16.75	17.58	19.53	Without Interference
	20	●	●			70		20.94	21.98	Without Interference	Without Interference
	25	●	●			70		26.18	27.47	Without Interference	Without Interference
3	8	No Standards	●	4.5	2.9	50	6	8.38	8.79	9.76	10.98	1
	12	●	●			50		12.57	13.19	14.65	16.48
	16	●	●			70		16.75	17.58	19.53	21.97
	20	●	●					20.94	21.98	24.41	27.46
	25	●	●					26.18	27.47	30.51	Without Interference
	30	●	●					31.41	32.97	36.62	Without Interference
	40	●	●			100		41.88	43.96	Without Interference	Without Interference
3.5	16	No Standards	●	5.5	3.35	70	6	16.75	17.58	19.53	21.97	1
	25	No Standards	●			70		26.18	27.47	30.51	Without Interference
	35	No Standards	●			100		36.65	38.46	Without Interference	Without Interference
4	12	No Standards	●	6	3.8	50	6	12.57	13.19	14.65	16.48	1
	16	●	●			50		16.75	17.58	19.53	Without Interference
	20	●	●			70		20.94	21.98	24.41	Without Interference
	30	●	●			70		31.41	32.97	Without Interference	Without Interference
	35	No Standards	●			100		36.65	38.46	Without Interference	Without Interference
	40	●	●					41.88	43.96	Without Interference	Without Interference
	45	No Standards	●					47.12	49.45	Without Interference	Without Interference
	50	No Standards	●					52.35	54.95	Without Interference	Without Interference
5	16	●	●	7.5	4.8	70	6	16.75	17.58	Without Interference	Without Interference	1
	25	●	●			70		26.18	27.47	Without Interference	Without Interference
	35	●	●			100		36.65	Without Interference	Without Interference	Without Interference
	50	●	●			100		52.35	Without Interference	Without Interference	Without Interference
6	20	●	●	9	5.8	70	6	Without Interference	Without Interference	Without Interference	Without Interference	2
	30	●	●			70		Without Interference	Without Interference	Without Interference	Without Interference
	40	●	●			100		Without Interference	Without Interference	Without Interference	Without Interference
	50	●	●			100		Without Interference	Without Interference	Without Interference	Without Interference

More Information

● The ideal length under neck can be selected for workpiece machining in deep areas.
● The XAL coating with excellent lubricity delivers stable wear-resistant performance, especially when milling mild steel, giving improved shape accuracy to the machined objects.

[ ! ]The XAL coating does not have conductive properties. Cannot be used with conduction model tool setters.

XAL Coated Carbide Long Neck Square End Mill, 4-Flute / Long Neck Model:Related Image

[ ! ]The actual effective length is a guideline. Confirm the actual measurement if concerned about interference with the workpiece.