VAC Series Carbide 4-Flute Uneven Lead Long Neck Radius End Mill

Brand :

MISUMI

Caution

Product Description

[Features]
·Effective for deep cutting due to long neck type
·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
·Can process heat-treated steel up to 50HRC
·Cutting edge radius also reinforced cutting edge rigid
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

VAC Series Carbide 4-Flute Uneven Lead Long Neck Radius End Mill:Related Image

Specifications

VAC Series Carbide 4-Flute Uneven Lead Long Neck Radius End Mill:Related Image

Model Number
VAC-CR-VHEM4LB

Outer Diameter D	Length Under Neck	Radius R				Flute Length ℓ	Overall Length L	Shank Diameter d	Actual Effective Length Depends on Work Inclination Angle					Figure
Outer Diameter D	Length Under Neck	Radius R				Flute Length ℓ	Overall Length L	Shank Diameter d	0.5°	1°	1.5°	2°	3°	Figure
1	4	0.2	0.3			1.5	50	4	4.36	4.60	4.86	5.16	5.89	1
	6	0.2	0.3			1.5	50	4	6.46	6.82	7.21	7.66	8.74	1
	8	0.2				1.5	50	4	8.57	9.04	9.56	10.15	11.18	1
1.5	6	0.2		0.5		2.3	50	4	6.46	6.82	7.21	7.66	8.56	1
	8	0.2				2.3	50	4	8.57	9.04	9.56	10.15	10.89	1
	10	0.2				2.3	50	4	10.67	11.26	11.91	12.53	13.23	1
	16		0.3			2.3	50	4	16.98	17.92	18.67	19.16	20.24	1
2	6			0.5		3	50	4	6.46	6.82	7.21	7.66	8.27	1
	8	0.2		0.5		3	50	4	8.57	9.04	9.56	10.04	10.60	1
	10		0.3	0.5		3	50	4	10.67	11.26	11.91	12.25	12.94	1
	12	0.2	0.3	0.5		3	50	4	12.77	13.48	14.09	14.47	15.28	1
	14			0.5		3	50	4	14.88	15.70	16.25	16.68	17.61	1
	16			0.5		3	50	4	16.98	17.92	18.40	18.89	19.95	1
3	10	0.2		0.5		4.5	50	6	10.97	11.57	12.24	13.00	13.73	1
	12	0.2	0.3	0.5		4.5	50	6	13.07	13.79	14.59	15.22	16.07	1
	16	0.2	0.3	0.5	1	4.5	60	6	17.28	18.23	19.13	19.64	20.74	1
	20	0.2		0.5	1	4.5	60	6	21.49	22.67	23.44	24.07	25.42	1
	26			0.5		4.5	65	6	27.80	29.15	29.91	30.70	32.43	1
4	10		0.3	0.5	1	6	50	6	10.97	11.57	12.14	12.46	13.16	1
	12	0.2		0.5	1	6	50	6	13.07	13.79	14.29	14.67	15.50	1
	14			0.5		6	60	6	15.18	16.01	16.45	16.88	17.83	1
	16	0.2	0.3	0.5	1	6	60	6	17.28	18.13	18.60	19.10	20.17	1
	20	0.2		0.5	1	6	60	6	21.49	22.34	22.91	23.52	24.84	1
	26	0.2		0.5	1	6	65	6	27.80	28.64	29.38	30.16	31.85	1
	30			0.5	1	6	70	6	32.01	32.84	33.69	34.58	36.52	1
	35				1	6	70	6	37.16	38.09	39.08	40.11	42.36	1
	40				1	6	80	6	42.28	43.34	44.46	45.64	48.21	1
6	20	0.2	0.3	0.5	1	9	60	6	20.78	21.30	21.85	22.43	23.69	2
6	30		0.3	0.5	1	15	90	6	31.02	31.81	32.63	33.49	35.37	2
8	25		0.3	0.5	1	12	70	8	26.19	26.85	27.54	28.27	29.86	2
8	35			0.5	1	20	100	8	36.43	37.35	38.32	39.33	41.54	2
10	30		0.3	0.5	1	15	75	10	31.31	32.10	32.93	33.80	35.70	2
10	40			0.5	1	25	100	10	41.56	42.60	43.70	44.86	47.38	2
12	32			0.5	1	18	80	12	33.36	34.20	35.08	36.02	38.04	2
12	50			0.5	1	30	110	12	46.68	47.85	49.09	50.39	53.22	2

More Information

● High efficiency machining can be realized by suppressing chattering through the use of "unequal lead."
● Smooth chip discharge is achieved using an optimum groove geometry.
[ ! ]The electrical conductivity is minimal.

VAC Series Carbide 4-Flute Uneven Lead Long Neck Radius End Mill:Related Image

VAC Series Carbide 4-Flute Uneven Lead Long Neck Radius End Mill:Related Image

[ ! ]The actual effective length is a guideline. Confirm the actual measurement if concerned about interference with the workpiece.