Brass Tightening Coupler Elbow for Sputter Resistance

Brand :

PISCO

Caution

Product Description

Special brass is used for metal body to greatly improve corrosion resistance to water.

[Features]
· Special brass is used for metal body.
· Corrosion resistance to water has been greatly increased.
· Ideal for use in the automobile industry and for mold temperature control.
· Never worry about forgetting or losing the sleeve again with this no-sleeve design.
· A wide variety is available to support a wide range of applications.
· 5 shapes: Types C, CF, MF, L and E. Adjustable tube: 10 types are available from φ4 to φ16mm.

Specifications Of All Brass Compression Fitting - Elbow

Appearance of All Brass Compression Fitting - Elbow

Dimensional drawing of All Brass Compression Fitting - Elbow

Usable fluids: air, water, other^*
Maximum operating pressure: depends on the maximum operating pressure of the tube
Operating vacuum pressure: -100 kPa
Operating temperature range: depends on the specification range of the tube (no freezing)

*For fluids other than air and water, compliance with the specifications may vary depending on usage conditions, so please check before using.
*When using water or other liquids, make sure the surge pressure stays below the maximum operating pressure.
*The operating temperature range depends on the operating temperature of the tube that is used, but when used at high temperature, there is a risk of damage if an excessive load is applied to the main body.

Compatible Sizes

Millimeter Size (mm)	ø4 × ø2.5, ø6 × ø4, ø8 × ø5, ø8 × ø6, ø10 × ø6.5, ø10 × ø7.5, ø12 × ø8, ø12 × ø9, ø16 × ø11, ø16 × ø13

Tube size (outer diameter × internal diameter)

Thread size
Taper pipe male thread: R1/8, R1/4, R3/8, R1/2
Taper pipe female thread: Rc1/8, Rc1/4, Rc3/8, Rc1/2

Format	Tube Outer Diameter × Internal Diameter øD	R	A	L1	L2	E1	E2	C	Hex H1	Hex H2	øP1	øP2	Effective Cross-Sectional Area (mm²)	Mass (g)
NKL0425-01	4 × 2.5	R1/8	8	18	17	19.5	10.5	5.5	8	8	10	10	0.9	13
NKL0425-02	4 × 2.5	R1/4	11	19	20	21.5	10.5	5.5	8	8	14	10	0.9	17
NKL0640-01	6 × 4	R1/8	8	18.8	17	20	11	6	10	8	10	10	4	15
NKL0640-02		R1/4	11	19.8	20	22				8	14	10		19
NKL0640-03		R3/8	12	21.7	21.5	23.5				10	17	13		29
NKL0850-01	8 × 5	R1/8	8	22.5	19.5	23	12	7	12	10	14	14	8.5	24
NKL0850-02		R1/4	11	22.5	21.5	23					14	14		25
NKL0850-03		R3/8	12	22.1	21.5	24.5					17	13		31
NKL0860-01	8 × 6	R1/8	8	22.5	19.5	23	12	7	12	10	14	14	12	23
NKL0860-02		R1/4	11	22.5	21.5	23					14	14		25
NKL0860-03		R3/8	12	22.1	21.5	24.5					17	13		30
NKL1065-02	10 × 6.5	R1/4	11	27.2	24	28	14.8	9	16	14	17	17	14	47
NKL1065-03		R3/8	12	26.9	24	28					17			51
NKL1065-04		R1/2	15	28.6	27.5	29.5					21			66
NKL1075-02	10 × 7.5	R1/4	11	27.2	24	28	14.8	9	16	14	17	17	20	47
NKL1075-03		R3/8	12	26.9	24	28					17			51
NKL1075-04		R1/2	15	28.6	27.5	29.5					21			66
NKL1280-02	12 × 8	R1/4	11	27.8	24	28.5	15.4	9	17	14	17	17	24	48
NKL1280-03		R3/8	12	27.5	24	28.5					17			52
NKL1280-04		R1/2	15	29.2	27.5	30					21			67
NKL1290-02	12 × 9	R1/4	11	27.8	24	28.5	15.4	9	17	14	17	17	29	46
NKL1290-03		R3/8	12	27.5	24	28.5					17			50
NKL1290-04		R1/2	15	29.2	27.5	30					21			65
NKL1611-03	16 × 11	R3/8	12	34.9	28	31.5	16.2	9.5	23	17	23	23	45	92
NKL1611-04	16 × 11	R1/2	15	35.1	30	31.5	16.2	9.5	23	17	23	23	45	101
NKL1613-03	16 × 13	R3/8	12	34.9	28	31.5	16.2	9.5	23	17	23	23	59	86
NKL1613-04	16 × 13	R1/2	15	35.1	30	31.5	16.2	9.5	23	17	23	23	59	97

Units: mm

*L1 dimensions are reference dimensions after tightening with screws.