Corrosion Resistant SUS316 Tightening Fitting, Elbow
Caution
Product Description
[Features]
· SUS316 with excellent corrosion resistance is used for all materials.
· The sleeveless design eliminates worries about forgetting to attach the sleeve or losing it, etc.
·Air cleaning and packaging in a cleanroom (class 1000).
·Inch sizes are added. More varieties have also been added.
·Ideal for chemical piping and other special environments in sectors that require a focus on airtightness.
·Polyurethane tubes can also be used.
[Applications]
·Chemical, medical, pharmaceutical and food-related applications, etc.
Specifications Of Tube Fitting Stainless SUS316 Compression Fitting - Elbow
Elbow appearance
Elbow dimensional drawing (millimeter size)
Elbow dimensional drawing (inch size)
Usable fluids: air, water, other*
Maximum operating pressure: depends on the maximum operating pressure of the tube.
Operating vacuum pressure: -100 kPa
Operating temperature range: depends on the specification range of the tube. (No freezing)
- *For chemicals, mixed gases, etc., compliance with the specifications may vary depending on usage conditions, so please check before using.
Compatible Sizes
| Millimeter Size (mm) | ø4 × ø2, ø4 × ø2.5, ø6 × ø4, ø8 × ø5, ø8 × ø6, ø10 × ø6.5, ø10 × ø7.5, ø10 × ø8, ø12 × ø8, ø12 × ø9, ø12 × ø10, ø16 × ø11, ø16 × ø13 |
|---|---|
| Inch Size | ø6.35 × ø4.57 (ø1/4), ø9.53 × ø6.99 (ø3/8), ø12.7 × ø9.56 (ø1/2) |
- *Tube size (outer diameter × internal diameter)
Thread size
- Taper pipe male thread: R1/8, R1/4, R3/8, R1/2
- Taper pipe female thread: Rc1/8, Rc1/4, Rc3/8, Rc1/2
| Format | Tube Outer Diameter × Internal Diameter øD | R | A | B | L1 | L2 | E1 | E2 | E3 | C | Opposite Side H1 | Opposite Side H2 | Mass (g) | Orifice Diameter (ømm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| NSL1/4-01□ | 6.35 × 4.57 | R1/8 | 8 | 27.9 | 24 | 21 | 27.9 | 21 | 11.5 | 6 | 12 | 12 | 27 | 3.5 |
| NSL1/4-02□ | R1/4 | 11 | 30.1 | 24.1 | 22 | 30.1 | 22 | 14 | 35 | |||||
| NSL1/4-03□ | R3/8 | 12 | 40 | 33.6 | 29 | 40 | 29 | 19 | 86 | |||||
| NSL3/8-02□ | 9.53 × 6.99 | R1/4 | 11 | 40 | 34 | 29 | 40 | 29 | 16.5 | 9 | 17 | 19 | 88 | 5.5 |
| NSL3/8-03□ | R3/8 | 12 | 33.6 | 89 | ||||||||||
| NSL3/8-04□ | R1/2 | 15 | 44.3 | 36.1 | 31 | 44.3 | 31 | 23 | 132 | |||||
| NSL1/2-02□ | 12.7 × 9.56 | R1/4 | 11 | 40 | 34 | 29 | 40 | 29 | 16.5 | 9 | 19 | 19 | 88 | 8.1 |
| NSL1/2-03□ | R3/8 | 12 | 33.6 | 89 | ||||||||||
| NSL1/2-04□ | R1/2 | 15 | 44.3 | 36.1 | 31 | 44.3 | 31 | 23 | 131 |
Elbow (inch size)
Units: mm
*1. L1 dimensions are reference dimensions after tightening with screws.
* 2. For the □ in the order format, input -TP only if you want the sealing-tape specification for the thread part.
- *See the manufacturer's catalog for the dimension table of the elbow (millimeter size).