Corrosion Resistant SUS316 Tighten Fitting Branch Tee

Brand :

PISCO

Caution

Product Description

All parts made of SUS316 for excellent corrosion resistance. * The CAD data for this series is being revised. This will be available as soon as modifications are complete.

Drawing

Units: mm

Product Specifications

Specifications

Operating fluid	Air, water, etc. (*)
Maximum operating pressure	According to the maximum operating pressure of the tube
Operating vacuum pressure	-100 kPa
Operating temperature range	Depends on the tube specification range (no freezing)

* Regarding chemicals, mixed gas, etc., the conformity of specifications may differ depending on the usage conditions, so please check before using.

Compatible size

Tube size	Metric size
Symbol	0420	0425	0640	0806
Tube outer diameter (mm)	⌀4 (outer diameter 4 mm)		⌀6 (outer diameter 6 mm)	⌀8 (outer diameter 8 mm)
Tube inner diameter (mm)	⌀2 (inner diameter 2 mm)	⌀2.5 (inner diameter 2.5 mm)	⌀4 (inner diameter 4 mm)	⌀6 (inner diameter 6 mm)
Designation For Tightening Nut Only	4		6	8
Designation For Conical Spring Washer Only	12		14	16

Tube size	Metric size
Symbol	1075	1080	1290	1210	1613
Tube outer diameter (mm)	⌀10 (outer diameter 10 mm)		⌀12 (outer diameter: 12 mm)		⌀16 (outer diameter 16 mm)
Tube inner diameter (mm)	⌀7.5 (inner diameter 7.5 mm)	⌀8 (inner diameter 8 mm)	⌀9 (inner diameter 9 mm)	⌀10 (inner diameter 10 mm)	⌀13 (inner diameter 13 mm)
Designation For Tightening Nut Only	10		12		16
Designation For Conical Spring Washer Only	18		20		24

* If you only need the tightening nut, enter the symbol of tightening nut only.
* If you need a disc spring washer of bulkhead type, please enter the symbol for the disc spring washer only. For the bulkhead socket type, select it from the thread size.

Thread size	Tapered pipe thread
Symbol	01	02	03	04
Male thread size	R1/8	R1/4	R3/8	R1/2
Female thread size	Rc1/8	Rc1/4	Rc3/8	Rc1/2
Designation For Conical Spring Washer Only	14	18	22	27

* If you need a disc spring washer of bulkhead type, please enter the symbol for the disc spring washer only.

Structural drawing (elbow type: for NSL)

* Since it can be used in special environments such as those related to chemicals/foods, the thread section has no thread sealant in consideration of the influence of sealant.

Standard table

Units: mm

Part number	Tube outer diameter × inner diameter ⌀D	R	A	B	L1	L2	E1	(E2)	E3	C	Width across flats H1	Width across flats H2	Weight (g)	Orifice diameter (ømm)
NSD0420-01□	4 × 2	R1/8	8	42	38	17	21	27.9	11.5	5.5	10	12	36	1.3
NSD0420-02□	4 × 2	R1/4	11	44	38	16	22	30.1	11.5	5.5	10	14	45	1.3
NSD0425-01□	4 × 2.5	R1/8	8	42	38	17	21	27.9	11.5	5.5	10	12	36	1.4
NSD0425-02□	4 × 2.5	R1/4	11	44	38	16	22	30.1	11.5	5.5	10	14	45	1.4
NSD0640-01□	6 × 4	R1/8	8	42	38	17	21	27.9	11.5	6	12	12	39	3
NSD0640-02□		R1/4	11	44	38	16	22	30.1				14	48
NSD0640-03□		R3/8	12	58	51.7	22.7	29	40				19	113
NSD0860-01□	8 × 6	R1/8	8	50	46	21	25	34.8	13.5	7	14	17	80	5
NSD0860-02□		R1/4	11	50	44	19	25	34.8				17	77
NSD0860-03□		R3/8	12	58	51.7	22.7	29	40				19	112
NSD1075-02□	10 × 7.5	R1/4	11	58	52	23	29	40	16.5	9	17	19	121	6
NSD1075-03□		R3/8	12	58	51.7	22.7	29	40				19	120
NSD1075-04□		R1/2	15	62	53.8	22.8	31	44.3				23	164
NSD1080-02□	10 × 8	R1/4	11	58	52	23	29	40	16.5	9	17	19	120	6.5
NSD1080-03□		R3/8	12	58	51.7	22.7	29	40				19	119
NSD1080-04□		R1/2	15	62	53.8	22.8	31	44.3				23	162
NSD1290-02□	12 × 9	R1/4	11	58	52	23	29	40	16.5	9	19	19	126	7.5
NSD1290-03□		R3/8	12	58	51.7	22.7	29	40				19	127
NSD1290-04□		R1/2	15	62	53.8	22.8	31	44.3				23	170
NSD1210-02□	12 × 10	R1/4	11	58	52	23	29	40	16.5	9	19	19	124	8.5
NSD1210-03□		R3/8	12	58	51.7	22.7	29	40				19	125
NSD1210-04□		R1/2	15	62	53.8	22.8	31	44.3				23	167
NSD1613-03□	16 × 13	R3/8	12	64	57.7	25.7	32	45.3	18	9.5	23	23	172	11.5
NSD1613-04□	16 × 13	R1/2	15	64	55.8	23.8	32	45.3	18	9.5	23	23	174	11.5

Selection support information

Part number display example

[(4) Thread section seal specifications]

Blank: Standard specifications (no sealant or sealing tape)
-TP: Sealing tape specifications (wrap sealing tape around the thread section)