Vacuum Pad, Soft Type, VPHC, One-touch Fitting Type
Caution
Product Description
Optimal for removing molded parts and transporting easily scratched materials. *CAD data currently being revised for this series. This will be available as soon as modifications are complete.
[Features]
· The pad rubber is flexible enough to adhere plastic molded parts while leaving relatively few traces.
· A wide range of pad sizes, pad materials, and holder shapes are available.
· Downsizes holders (A and B types) for existing vacuum pads, saving space.
· The pad section can be changed without removing the holder from the equipment, as is conventional.
· Also compatible with the optional fall prevention valve and pad direct attachment type filter.
· Pad holder (VPHD and VPHE types) with vacuum inlet on both sides.
Dimensions
Standard table
| Model code | Tube O.D. øD | Pad O.D. ød | B | L1 | L2 | Tube end C | Spring force (N) | Connection config. code |
|---|---|---|---|---|---|---|---|---|
| VPHC4-9L[5]-4J[9] | 4 | 4 | 56.9 | 12.2 | 21.9 | 10.9 | 0.9 ~2.7 | -T15 |
| VPHC4-9L[5]-6J[9] | 6 | 58.3 | 11.7 | |||||
| VPHC6-9L[5]-4J[9] | 4 | 6 | 56.9 | 10.9 | ||||
| VPHC6-9L[5]-6J[9] | 6 | 58.3 | 11.7 | |||||
| VPHC8-9L[5]-4J[9] | 4 | 8 | 56.9 | 10.9 | ||||
| VPHC8-9L[5]-6J[9] | 6 | 58.3 | 11.7 | |||||
| VPHC10-9L[5]-4J[9] | 4 | 10 | 58.7 | 14 | 23.7 | 10.9 | ||
| VPHC10-9L[5]-6J[9] | 6 | 60.1 | 11.7 | |||||
| VPHC15-9L[5]-4J[9] | 4 | 15 | 58.7 | 10.9 | ||||
| VPHC15-9L[5]-6J[9] | 6 | 60.1 | 11.7 | |||||
| VPHC20-9L[5]-4J[9] | 4 | 20 | 59.7 | 15 | 24.7 | 10.9 | -T40 | |
| VPHC20-9L[5]-6J[9] | 6 | 61.1 | 11.7 | |||||
| VPHC30-9L[5]-4J[9] | 4 | 30 | 59.7 | 10.9 | ||||
| VPHC30-9L[5]-6J[9] | 6 | 61.1 | 11.7 | |||||
| VPHC40-9L[5]-4J[9] | 4 | 40 | 59.7 | 10.9 | ||||
| VPHC40-9L[5]-6J[9] | 6 | 61.1 | 11.7 |
Units: mm
*[5]: Replaced with Pad rubber material code. Refer to the catalog for details.
*[9]: Replaced with "-S3" for -S3 spec. (Copper alloy free material for metal parts and FKM or HNBR for sealing parts).
*Pad material N and NE are not suitable for use under ozone environment.
*Tightening torque of a pad holder fixing bulkhead nut is 2~3 N·m.