Vacuum Pad, Soft Bellows Type, Pad Rubber
Caution
Product Description
An extremely soft type fitting that is optimally suited for adhering to paper and plastic molded artifacts.
[Features]
· The pad rubber has superior elasticity for adhering to paper, etc. In addition, adhering to plastic molded artifacts leaves relatively no trace.
· This fitting is offered in a wide range of pad sizes, pad materials, and holder shapes.
· The holders (A and B types) have been downsized for existing vacuum pads making it possible to save space.
· The pad can be changed in the normal way without detaching the holder from the equipment.
· In addition, this fitting is also compatible with the optional fall prevention valve and the directly attachable type pad filters.
· Fittings with vacuum outlets on both sides of the pad holder (VPHD and VPHE types) are also now available. This fitting is optimally suited for use in adhering/transporting molded artifacts by linking multiple vacuum pads to a single vacuum source.
· Pad holders have been added for applications that require the use of non-copper based metals and measures against low-concentration ozone.
· No copper-based metals are used in the metal component materials. HNBR is utilized for the rubber sealing material.
Fixed Type
| Vacuum Outlet, Upper | Vacuum Outlet, Horizontal | Direct Attachment | ||||
| Type | Standard | Small | Standard | Small | Standard | Small |
| Symbol | VPA | VPMA | VPB | VPMB | - | - |
Spring Type
| Vacuum Outlet, Upper | Vacuum Outlet, Horizontal | Direct Attachment | |||
| Type | Standard | Small | Standard | Small | Standard |
| Symbol | VPC | VPMC | VPD | VPMD | VPF |
Pad material
Nitrile rubber, silicone rubber, urethane rubber, conductive NBR (low-resistance type), HNBR, EPDM
Pad side
Ø6 (diameter 6 mm), Ø8 (diameter 8 mm), Ø10 (diameter 10 mm), Ø15 (diameter 15 mm), Ø20 (diameter 20 mm)
Pad rubber has excellent elasticity and will adhere to substances such as paper. It also adheres to plastic molded parts leaving relatively little trace.
Fittings with vacuum outlets on both sides of the pad holder are also now available. This fitting is ideal for use in adhering to / transporting molded parts by linking multiple vacuum pads to a single vacuum source.
Small holders downsized from existing vacuum pad holders (A, B, C, D types) to save space.
Also compatible with the optional fall prevention valve and directly attachable-type pad filters.
Pad and holder fixed detail diagram
VP6 to 15LB□ fixed details diagram
VP20LB□ fixed details diagram
| Format | Pad External Diameter Ød | L |
|---|---|---|
| VP 6LB□ | 6 | 15 |
| VP 8LB□ | 8 | 15 |
| VP 10LB□ | 10 | 15.5 |
| VP 15LB□ | 15 | 17.5 |
| VP 20LB□ | 20 | 20 |
Unit: mm