Light Coupling 15 Series Plug One Touch Fitting Straight
Caution
Product Description
A coupling joint that can be used for easy attachment and removal. PISCO light coupling 15 series plugs with one-touch fitting (straight).
· Materials: Resin, NBR.
· Connection type: One-touch fitting.
· Type: Standard.
15 Series Plug, One-Touch Coupling, Straight: Specifications
15 series plug, one-touch coupling, straight: external appearance
15 series plug, one-touch coupling, straight: dimensional drawing
Usable medium: Air
Maximum operating pressure: 0.9 MPa
Usable vacuum pressure: -100 kPa (this specification cannot be used to maintain a vacuum)
Operating temperature range: 0 to 60°C (without freezing)
Size Table
| Format | Tube Diameter øD | B | øP | Tube End C | Mass (g) | Effective Sectional Area (mm2) |
|---|---|---|---|---|---|---|
| CPP-15-6□ | 6 | 32.8 | 15 | 17 | 5 | 11 |
| CPPP-15-8□ | 8 | 34.7 | 15 | 18.1 | 6 | 24 |
| CPPP-15-10□ | 10 | 38.5 | 18 | 20.2 | 10 | 23 |
Units: mm
Insert the symbol B in the □ at the end of the format for black, and W for light gray.
Applicable Tube Size
| Millimeter Size (mm) | ø4, ø6, ø8, ø10, ø12 |
|---|---|
| Inch Size | ø1/8, ø5/32, ø1/4, ø5/16, ø3/8, ø1/2 |
Plug Installation And Removal
Plug installation
Light couplings can be installed simply by inserting the plug into the socket, without pressing the open sleeve.
When installing plugs, refer to the individual safety precautions.
Plug removal
Push the socket's open sleeve to open the lock ball and remove the plug.
When removing a plug, refer to the individual safety precautions.
Warning
Do not use for purposes other than those defined for the products by series. Please inquire about use of products for other than their specified purposes.
Warning
1. Tighten the partition nuts for partition unions (PM), partition unions P (PMP) and partition union elbows (PML) to within the specified tightening torque range.
Partition nuts torque value
| Product Name | Fitting Size | Tightening Torque | |
|---|---|---|---|
| Partition Unions (PM) | Partition Unions P (PMP), Partition Union Elbows (PML) | ||
| Tube Fitting | 4 | 12.0 to 14.0 N⋅m | 0.4 to 0.6 N⋅m |
| 6 | 18.0 to 21.0 N⋅m | 0.9 to 1.1 N⋅m | |
| 8 | 18.0 to 21.0 N⋅m | 1.1 to 1.3 N⋅m | |
| 10 | 19.0 to 21.0 N⋅m | 2.3 to 2.7 N⋅m | |
| 12 | 19.0 to 21.0 N⋅m | 2.7 to 3.3 N⋅m | |
| 16 | 42.0 to 54.0 N⋅m | - | |
| Tube Fitting Mini | 3 | 2.5 to 3.5 N⋅m | - |
| 4 | 5.0 to 7.0 N⋅m | ||
| 6 | 12.0 to 14.0 N⋅m | ||
2. Tightening partition nuts may cause deformation of the object being tightened or cause oil to adhere to its surfaces, which in turn will loosen the partition fixing area.
3. Our air pressure pipe coupling anticipates that tubes are installed before use, so if air is applied when tubes are not attached to flashings, etc., the elastic sleeves may be ejected outside of the product body.
Please refer to the manufacturer's catalog for safety precautions other than those listed above.