TOYORON

Brand :

TOYOX

Caution

Do not use this valve for fuels (such as heavy oil, diesel, kerosene, and gasoline), solvents, and food, beverage, and medical applications (medical and pharmaceutical).

Product Description

Pressure feed hose made of flexible PVC for piping in plant facilities and embedding in various machines.
[Features]
・ Can be used for a wide range of liquids, including water, chemicals, air, oil (mineral oil), and powders (other than food).
・ More transparent than a rubber hose, allowing for easy and safe verification of its contents.
・ Lighter, more flexible and longer service life than rubber hoses.
・ Available with internal diameters of ø4 to ø75 (inner diameter 4 to 75 mm), compatible with larger sizes.
・ Easy-to-cut and fittings can be easily inserted, enabling more efficient piping work.
[Applications]
・ Ideal for piping in plant facilities.
・ Ideal for embedding in various machines.

Drawing

Product Specifications

Applications	Piping for factory equipment (machine tools, assembly robots, molding machines, printing machines, mold cooling), for embedding in various machines
Fluid	Oil, chemicals (including gas and pure water), powder, air, water, hot water
Main material	Soft Vinyl Chloride	Reinforcements	Polyester thread
Function	No separate disposal required: Most ideal, Transparency: Most ideal, Flexibility: Most ideal, Pumping: Most ideal,
Function	Insulation property○Low elution○Chemical resistant○Oil resistant○
Operating Temperature Range	-5°C to 60°C
Internal diameter	4 mm to 75 mm
Coloring	Blue transparent / image line + blue warp included

Can Be Used for Various Purposes With a Wide Variety of Size Variations and Stable Performance

The Toyox line is the mark of TOYORON, which has improved durability of the inner tube. (Multiple blue warp threads)

Specifications Table

Hose Part number	Nominal inner diameter d × outer diameter D	Operating Pressure (MPa)		Operating Temperature Range	Length (1 m unit designation)	Standard Length	Standard size weight	Minimum bend radius	Packaging	Coloring
	Nominal inner diameter d × outer diameter D	Operating Pressure (MPa)		Operating Temperature Range	Length (1 m unit designation)	Standard Length	Standard size weight	Minimum bend radius
	mm	23°C	60°C	°C	m	m	kg/roll	mm
TR-4	4 × 9	0 to 1.5	0 to 1.0	-5 to 60	1 to 100	100	7	15	Bobbin reel	Blue transparent image Line + with blue warp
TR-6	6 × 11	0 to 1.5	0 to 1.0		1 to 100	100	9	20
TR-8	8 × 13.5	0 to 1.5	0 to 1.0		1 to 100	100	13	35
TR-9	9 × 15	0 to 1.5	0 to 1.0		1 to 100	100	15	45
TR-10	10 × 16	0 to 1.2	0 to 1.0		1 to 100	100	16	45
TR-12	12 × 18	0 to 1.2	0 to 0.8		1 to 100	100	19	55
TR-15	15 × 22	0 to 1.0	0 to 0.8		1 to 100	100	27	80
TR-19	19 × 26	0 to 1.0	0 to 0.6		1 to 50	50	16	95
TR-22	21.5 × 29	0 to 1.0	0 to 0.6		1 to 50	50	20	120
TR-25	25 × 33	0 to 1.0	0 to 0.6		1 to 50	50	25	140
TR-32	32 × 41	0 to 0.7	0 to 0.4		1 to 50	50	35	185	Film roll
TR-38	38 × 48	0 to 0.6	0 to 0.4		1 to 50	50	45	300
TR-45	45 × 56	0 to 0.6	0 to 0.4		1 to 40	40	48	400
TR-50	50 × 62	0 to 0.6	0 to 0.3		1 to 40	40	54	440
TR-63	63 × 80	0 to 0.4	0 to 0.3		1 to 20	20	53	650
TR-75	75 × 92	0 to 0.3	0 to 0.3		1 to 20	20	62	800

Product features details

Advantages of use 1

The inner tube has good oil resistance and is hard to harden, and lasts a long time
Hose is soft and fittings are easy to insert

Advantages of use 2

Lineup of products with inner diameters from ø4 to 75. Compatible with the thick size range
Highly transparent, you can check the fluid and feel safe

Compliant with laws and regulations to ensure safe and secure.

Compliant with revised RoHS2 regulations.

Improved productivity and safety with dedicated fittings.

Various types of dedicated fittings are easy to install, prevent fluid leakage and hose disconnection for safe and secure.

Selection support information

■How to read 1 m unit cut part numbers

Type TR, TOYORON Hose, Selection support

(1) Type

(2) Nominal inner diameter d

(3) Cut length * Necessary to specify "-L" before the cut length.

* Please note that for part numbers such as TR-4 that do not specify the cut length, orders are made in units of 50 m or 100 m according to the nominal inner diameter d.

■1 m unit cut designation method

Please select the desired cut length from the "Standard size (m)" value using the filter criteria on the left side of this page.

Type TR, TOYORON Hose: Related images

Performance / test information

Change in pressure resistance by temperature of TOYORON hose (reference)

Type TR, TOYORON Hose: Related images

Cautions/prohibitions

1. Usable fluids are water, air, oil, chemicals, and powder. If you are using oil, chemicals, or powder, please check the chemical resistance data on the Toyox website. Alternatively, please contact the Toyox customer service center. * Do not use it for fuel oil (heavy oil, light oil, kerosene, gasoline, etc.) or solvents.
2. Do not use it for drinking or food.
3. Depending on the usage conditions of the hose, compounding agents such as plasticizers may be extracted or eluted, so please check the usage conditions and the effect on the product before use.
4. Use the hose within the operating temperature range.
5. Use the hose within the working pressure range.
6. This hose should be used with a minimum bending radius or greater. If used below the minimum bending radius, the hose may bend, or the pressure resistance may decrease.
　 Depending on the conditions, the hose may be prone to abrade when powder or granules, etc., are passed through it, so please make the bend radius of the hose as large as possible.
7. When cutting the hose, cut so that the surface of the hose is vertical. If it is not vertical, leakage or disconnection, etc., may occur.
8. Do not touch or bring close to naked flames.
9. Use a hose nipple suitable for the hose size. Do not use nipples with scratches or rust on their surface.
10. Using Toyox's dedicated products for hose fittings and hose clamps is recommended. Retighten the hose clamp appropriately.
11. There is a risk of fluid leakage or hose disconnection due to distortion of the resin at the clamp tightening part. Do not over-tighten steel wires, etc., as that may cut the inner and outer surfaces of the hose and cause the hose to burst.
12. Do not use one-push metal brackets for tubes. It may cause the hose to burst.
13. Do not let the fluid come into contact with anything other than the inner surface of the hose or fitting. Fluid may permeate the hose reinforcement layer or remain in the fitting, causing the growth (adherence) of bacteria and
　deterioration of the hose. Also, dust adhering to the outer surface, fragments of hose (reinforcing material), and printing ink may get mixed in.
14. Hose lifespan is greatly affected by fluid physical properties, temperature, flow velocity, and the frequency of pressurization and depressurization. If any of the following abnormalities or signs are found during pre-operation or regular inspections, stop using the product immediately,
　and repair or replace with a new hose.
　·Abnormalities near the metal brackets: Local stretch, curvature, leakage, blistering, and shallow insertion into the nipple
　·Presence or absence of damage::: Large scratches and cracks on the outer surface, and immersion into the reinforcement layer
　·Internal abnormalities::: Internal blistering and separation/abrasion *5 Peeling/abrasion (Exposure of hose reinforcements)
　*If there is an abnormality on the inner or outer surface, flakes from the hose or pieces of the reinforcing material may be mixed in the fluid.
　·Other significant changes (hardening, swelling, cracking, blistering, etc.)
15. Do not store outdoors or in direct sunlight. This may cause quality deterioration such as stickiness and cracks on the hose surface. Store in a well-ventilated place with low humidity. In addition, store the hose so that contaminants and dust do not enter.
16. Do not incinerate. Burning the product may damage the incinerator or produce gas harmful to the human body. Please handle it as industrial waste.
17. When disposing of the product, please follow the separate disposal procedures of each region.

Product comparison information

Dedicated fitting

* Some fittings are not handled by MISUMI

	Hose Size		TOYOCONNECTOR (nut tightening type)				W-SAFETY Nipple Set Male tapered pipe threads
			Brass	Brass	Brass+Resin	SUS	Brass
			TC3-B	TC6-B	TC3-PB	TCSB	WFSN
Hose part number	Nominal inner diameter d	Outer Diameter D
TR-9	9	15	○	—	○	○	—
TR-12	12	18	○	—	○	○	—
TR-15	15	22	○	—	○	○	○
TR-19	19	26	○	—	○	○	○
TR-25	25	33	○	—	○	○	○
TR-32	32	41	—	○	—	—	—
TR-38	38	48	—	○	—	—	—
TR-50	50	62	—	○	—	—	—

	Hose Size		KAMLOK
			KAMLOK coupler hose shank				TWINLOK coupler hose shank (With lock function)
			Aluminum	Stainless steel	Bronze	PP	Aluminum	Stainless steel	Bronze	PP
			633C AL	633C SST	633C BR	633C PP	633CL AL	633CL SST	633CL BR	633CL PP
Hose Part number	Nominal inner diameter d	Outer Diameter D
TR-19	19	26	○	○	○	○	—	—	—	—
TR-25	25	33	○	○	○	○	○	○	○	○
TR-32	32	41	○	○	○	—	○	○	○	—
TR-38	38	48	○	○	○	○	○	○	○	○
TR-50	50	62	○	○	○	○	○	○	○	○
TR-63	63	80	○	○	○	—	○	○	○	—
TR-75	75	92	○	○	○	○	○	○	○	—

	Hose Size		KAMLOK
			KAMLOK adapter hose shank
			Aluminum	Stainless steel	Bronze	PP
			633E AL	633E SST	633E BR	633E PP
Hose Part number	Nominal inner diameter d	Outer Diameter D
TR-19	19	26	○	○	○	○
TR-25	25	33	○	○	○	○
TR-32	32	41	○	○	○	—
TR-38	38	48	○	○	○	○
TR-50	50	62	○	○	○	○
TR-63	63	80	○	○	○	—
TR-75	75	92	○	○	○	○