Auxiliary Device Shock Absorber KSHES Series
Caution
Product Description
Multi orifice model with sensor switch Shock absorption is complete simultaneously with position detection.
Drawing
Dimensional drawing
Dimensional drawing
Product Specifications
| Items | Type | ||
|---|---|---|---|
| KSHES8 × 15 | KSHES10 × 20 | KSHES12 × 22 | |
| Maximum absorption ability (J) | 9.8 | 14.7 | 29.4 |
| Stroke absorption (mm) | 14.5 | 19.5 | 21.5 |
| Maximum impact velocity (m/s) | 1.5 | ||
| Maximum operating frequency (cycle/min) | 60 | ||
| Spring return force^* (N) | 10.7 | 14.4 | 16.3 |
| Deviation angle | 3° or less | ||
| Operating temperature range (°C) | 0 to +60 | ||
*: value at compression
[Sensor Switch Specifications]
Contact sensor switch:CS5T,CS11T
Non-contact sensor switch:ZC130,ZC153
Internal structure and name of each part
| No. | Name | Materials | |
|---|---|---|---|
| (1) | Holder | -H | Aluminum (Black anodizing) |
| -HS | Stainless steel (no surface treatment) | ||
| (2) | Rubber Cap | Urethane rubber | |
| (3) | Cap | Polyacetal | |
| (4) | Washer | Stainless steel | |
| (5) | Magnet | Rare earth magnet | |
| (6) | Magnet support | Polyacetal | |
Standard table
| Type | Symbol | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A | C | E | G | L | M | R | S | T | U | V | X | |||||
| ZC130□ | ZC153□ | CS5T□ | CS11T□ | |||||||||||||
| KSHES8 × 15 | 117.5 | 96 | 14.5 | 10 | M16 × 1.5 | 13 | 7 | 19 | 9.5 | 10 | 33 | 25 | 25 | 22 | 26 | |
| KSHES10 × 20 | 130.5 | 104 | 19.5 | 10 | M18 × 1.5 | 15 | 7 | 20 | 10 | 10 | 36 | |||||
| KSHES12 × 22 | 138.5 | 110 | 21.5 | 10 | M20 × 1.5 | 17 | 7 | 22 | 11 | 11 | 37 | |||||
| Type | Symbol | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Y | AR | AR1 | AY | AY1 | AX | AX1 | CC | CU | |
| KSHES8 × 15 | 17.5 | 7 | 4 | 19 | 19 | 21.9 | 21.9 | (15.5) | 14 |
| KSHES10 × 20 | 18.5 | 22 | 25.4 | 25.4 | 15.5 | 16 | 8 | 6 | 22 |
| KSHES12 × 22 | 24 | 27.7 | 27.7 | 18 | 18 | 19.5 | 10 | 6 | 24 |
Usage example
Holder and sensor switch mounting positions
When the sensor switch is attached to the position shown in the figure (the values in the table are for reference only), the magnet will be at the highest sensitivity position of the sensor switch at the stroke end.
Sensor switch mounting position
| Shock Absorber Type | A^* | B | ||||
|---|---|---|---|---|---|---|
| Sensor switch type | ||||||
| ZC130□ | ZC153□ | CS5T□ | CS11T□ | |||
| KSHES8 × 15 | 1.5 | 1.5 | 3 | 1 | 14.5 (0 to +0.3) | |
| KSHES10 × 20 | 1.5 | 1.5 | 3 | 1 | 19.5 (0 to +0.3) | |
| KSHES12 × 22 | 4.0 | 4.0 | 5.5 | 2 | 21.5 (0 to +0.3) | |
*: The sensor switch should be installed so that it does not protrude from the flange of the holder.
How to move the sensor switch
When the set screw is loosened, the sensor switch can move freely in the axial direction.
The tightening torque of the set screw should be 19.6 N⋅cm or less.
Sensor holder, set screw, sensor switch, holder
Cautions/prohibitions
- 1. The sensitivity of the sensor switch may vary depending on the environment. If the operation is unstable, move the sensor switch to the ideal position and fix it by tightening the set screw.
- 2. The sensor switch should be installed with the side where the type indication is visible upward.
Behind the scenes
This product was developed through rigorous testing to meet the customers' needs by combining the design expertise and production technology that the manufacturer has cultivated since its founding.