PP Type Tube Fitting for Clean Environment, Straight
Brand :
PISCO
Caution
Product Description
PP resin is used for the main body material, making it ideal for clean environments.
Specifications Of PP Type Tube Fitting - Straight
Appearance of PP Type Tube Fitting - Straight
Dimensional drawing of PP Type Tube Fitting - Straight
Unit: mm
Specifications
Usable fluids: air, water (see condition *1), other (see condition *1)
Maximum operating pressure: 1.0 MPa (at 0 to 20°C)*2
Operating vacuum pressure: -100 kPa
Operating temperature range: 0 to 80°C (no freezing)
Warning
- *1 When the fluid used is water or other chemicals, the following conditions must be observed.
- When using water or other liquids, make sure the surge pressure stays below the maximum operating pressure.
- Be sure to use an insert ring when using water or other liquids.
- For chemicals, mixed gases, etc., compliance with the specifications may vary depending on usage conditions, so please check before using.
- *2 For the maximum operating pressure when the operating temperature exceeds 20°C, see "Relationship between operating temperature and maximum operating pressure" below.
Tube Size
| Tube Size | Millimeter Size | Inch Size | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Symbol | 4 | 6 | 8 | 10 | 12 | 1/4 | 3/8 | 1/2 | |
| Tube Outer Diameter | Millimeters (mm) | φ4 | φ6 | φ8 | φ10 | φ12 | φ6.35 | φ9.53 | φ12.7 |
| Inches | φ5/32 | - | φ5/16 | - | - | φ1/4 | φ3/8 | φ1/2 | |
- *Tube outer diameter: φ4 (diameter 4 mm) is used in combination with φ5 (diameter 5 mm) / 32 inch, and φ8 (diameter 8 mm) is used in combination with φ5 (diameter 5 mm) / 16 inch.
Compatible Sizes
| Format | Tube Outer Diameter φD | R | A | B | L | Tube End C | Hex H | Mass (g) | Effective Cross-Sectional Area (mm2) |
|---|---|---|---|---|---|---|---|---|---|
| PPC4-01 (5) (6) (7) | 4 | R1/8 | 8 | 21.1 | 17.1 | 15 | 12 | 2.5 | 3.4 |
| PPC4-02 (5) (6) (7) | R1/4 | 11 | 22.3 | 16.3 | 14 | 3.5 | |||
| PPC6-01 (5) (6) (7) | 6 | R1/8 | 8 | 22.8 | 18.8 | 17.1 | 14 | 3 | 9.1 |
| PPC6-02 (5) (6) (7) | R1/4 | 11 | 24.8 | 3.5 | |||||
| PPC6-03 (5) (6) (7) | R3/8 | 12 | 24.9 | 18.6 | 17 | 5 | |||
| PPC8-01 (5) (6) (7) | 8 | R1/8 | 8 | 27.9 | 23.9 | 18.2 | 17 | 4.5 | 22.1 |
| PPC8-02 (5) (6) (7) | R1/4 | 11 | 26.6 | 20.6 | |||||
| PPC8-03 (5) (6) (7) | R3/8 | 12 | 27.5 | 21.2 | 6 | ||||
| PPC10-02 (5) (6) (7) | 10 | R1/4 | 11 | 32.6 | 26.6 | 20.4 | 19 | 7 | 30.5 |
| PPC10-03 (5) (6) (7) | R3/8 | 12 | 33.6 | 27.3 | 8 | ||||
| PPC12-03 (5) (6) (7) | 12 | R3/8 | 12 | 37.6 | 31.3 | 23.6 | 22 | 12 | 40.7 |
| PPC12-04 (5) (6) (7) | R1/2 | 15 | 34.1 | 25.9 | |||||
| PPC1/4-01 (5) (6) (7) | 1/4 | R1/8 | 8 | 22.8 | 18.8 | 17.1 | 14 | 3.5 | 9.1 |
| PPC1/4-02 (5) (6) (7) | R1/4 | 11 | 24.8 | 4 | |||||
| PPC1/4-03 (5) (6) (7) | R3/8 | 12 | 24.9 | 18.6 | 17 | 5 | |||
| PPC3/8-02 (5) (6) (7) | 3/8 | R1/4 | 11 | 32.6 | 26.6 | 20.4 | 19 | 8.5 | 30.5 |
| PPC3/8-03 (5) (6) (7) | R3/8 | 12 | 33.6 | 27.3 | 9.5 | ||||
| PPC1/2-03 (5) (6) (7) | 1/2 | R3/8 | 12 | 37.9 | 31.6 | 23.9 | 22 | 12 | 40.7 |
| PPC1/2-04 (5) (6) (7) | R1/2 | 15 | 34.4 | 26.2 |
- *L dimensions are reference dimensions after tightening with screws.
- *For (5) in the order format, input -F (FKM) or -HN (HNBR) only if you want to change the sealing rubber material. (If you want the clean washing specification, you cannot change the material to FKM.)
- *For (6) in the order format, input -TP if you want the sealing tape specification.
- *For (7) in the order format, input -C if you want the clean room packaging specification or -UC if you want the clean washing specification.