Tube Fitting for Chemicals, Chemical Type, Straight
Brand :
PISCO
Caution
Product Description
PPS is used for the main body material for excellent heat resistance, flame retardancy, and chemical resistance.
[Features]
· The main body uses PPS resin having superior heat resistance, flame retardant (UL94V-0) and chemical resistance properties.
· Has option for using FKM in the seal area. Other options include NBR and EPDM.
· No need to worry about rust or metal ions.
· Selectable from two packaging specifications--normal packaging and clean room packaging--according to the specific application.
Specifications Of Chemical Type Tube Fitting For Chemicals - Straight
Appearance of Chemical Type Tube Fitting For Chemicals - Straight
Dimensional drawing
| Usable Fluids | Air, water (see conditions*), other (see conditions*) |
|---|---|
| Maximum Operating Pressure | 0.9 MPa (at 0 to 20°C) |
| Operating Vacuum Pressure | -100 kPa |
| Operating Temperature Range | 0 to 80°C (when NBR sealing rubber is used: 0 to 60°C) (no freezing) |
- *1. When the fluid used is water or other chemicals, the following conditions must be observed.
- 1. When using water or other liquids, make sure the surge pressure stays below the maximum operating pressure.
- 2. Be sure to use an insert ring when using water or other liquids.
- 3. For chemicals, mixed gases, etc., compliance with the specifications may vary depending on usage conditions, so please check before using.
Formats
| Format | Tube Outer Diameter φD | R | A | B | L | Tube End C | Hex H1 | Hex H2 | φP | Effective Cross-Sectional Area (mm2) | Mass (g) | CAD File Name |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| APC4-01 (4) (5) (6) | 4 | R1/8 | 8 | 27.9 | 23.9 | 18.9 | 10 | 2.5 | 10.5 | 4.5 | 2.3 | APC4-01 |
| APC6-01 (4) (5) (6) | 6 | R1/8 | 8 | 30.3 | 26.3 | 21.3 | 12 | 4 | 12.5 | 11 | 2.9 | APC6-01 |
| APC6-02 (4) (5) (6) | R1/4 | 11 | 33.3 | 27.2 | 14 | 4.4 | APC6-02 | |||||
| APC6-03 (4) (5) (6) | R3/8 | 12 | 30.4 | 24 | 20.8 | 17 | 6.5 | APC6-03 | ||||
| APC8-01 (4) (5) (6) | 8 | R1/8 | 8 | 32.3 | 28.3 | 22.8 | 14 | 4 | 14.5 | 11 | 3.8 | APC8-01 |
| APC8-02 (4) (5) (6) | R1/4 | 11 | 35.3 | 29.2 | 6 | 23 | 4.5 | APC8-02 | ||||
| APC8-03 (4) (5) (6) | R3/8 | 12 | 31.4 | 25 | 22.3 | 17 | 6.2 | APC8-03 | ||||
| APC10-02 (4) (5) (6) | 10 | R1/4 | 11 | 37.5 | 31.5 | 25.3 | 17 | 6 | 17.8 | 23 | 6.4 | APC10-02 |
| APC10-03 (4) (5) (6) | R3/8 | 12 | 38.5 | 32.2 | 8 | 40 | 7.3 | APC10-03 | ||||
| APC12-02 (4) (5) (6) | 12 | R1/4 | 11 | 41.4 | 35.4 | 28.4 | 19 | 6 | 22 | 23 | 9.6 | APC12-02 |
| APC12-03 (4) (5) (6) | R3/8 | 12 | 42.4 | 36.1 | 8 | 40 | 11 | APC12-03 | ||||
| APC12-04 (4) (5) (6) | R1/2 | 15 | 38.4 | 30.2 | 22 | 10 | 55 | 13 | APC12-04 |
Units: mm
- *L dimensions are reference dimensions after tightening with screws.
- *For (4) in the order format, input -E (EPDM) or -N (NBR) only if you want to change the sealing rubber material.
- *For (5) in the order format, input -TP if you want the sealing tape specification.
- *For (6) in the order format, input -C if you want the clean room packaging specification.