For General Piping, Tube Fitting, Reducer
Caution
- The product images are representative only. Specifications may differ for each part number, including shape and color.
Product Description
Quick connect fitting whose lock claw evenly grips the circumference of the tube.
[Features]
· Quick-connect fitting for general pneumatic piping.
· After installation, you can change the take-off angle of the resin main body. (applicable to some products)
· A wide lineup of products.
· Allows centralized piping.
· Collet features good action to prevent sore fingertips even with frequent attachment and detachment. You can distinctly feel the pushing action in your fingers.
· The seal part uses an elastic sleeve with a unique shape that shuts out air leaks.
· The electroless nickel provides high corrosion resistance, and the black resin body makes dirt hard to see.
· The standard specifications enable the use of water and are ideal for temperature control of molds and dies.
Rich Variety
PGJ appearance
PGJ dimensional drawing
PGJ dimensional drawing
Specifications
| Usable Fluids | Air, water (see conditions*) |
|---|---|
| Maximum Operating Pressure | 1.0 MPa |
| Operating Vacuum Pressure | -100 kPa |
| Operating Temperature Range | 0 to 60°C (no freezing) |
- *When the fluid used is water, the following conditions must be observed.
- 1.When using water, make sure the surge pressure stays below the maximum operating pressure.
- 2.Tap water of the standard equivalent to the water supply in Japan can be used. Please inquire if you want to use other kinds of water.
- 3.Be sure to use an insert ring when using water.
Tube Size
| Millimeter Size (mm) | ø4, ø6, ø8, ø10, ø12, ø16 |
|---|---|
| Inch Size | ø1/8, ø5/32, ø3/16, ø1/4, ø5/16, ø3/8, ø1/2, ø5/8 |
Thread Size
| Millimeter Size (mm) | ø4, ø6, ø8, ø10, ø12, ø16 |
|---|---|
| Inch Size | ø1/8, ø5/32, ø3/16, ø1/4, ø5/16, ø3/8, ø1/2, ø5/8 |
| Format | Tube Outer Diameter øD1 | Compatible Fitting Diameter øD2 | B | E | øP | Tube End C | Orifice Diameter (ømm) | Mass (g) |
|---|---|---|---|---|---|---|---|---|
| PGJ4-6 | 6 | 4 | 38.8 | 18.9 | 12.5 | 17 | 2.5 | 3.5 |
| PGJ6-4 | 4 | 6 | 37.7 | 22.3 | 10 | 14.9 | 2.8 | 2.9 |
| PGJ6-8 | 8 | 43.2 | 21.9 | 14.5 | 18.1 | 4 | 5.3 | |
| PGJ8-4 | 4 | 8 | 40.2 | 23.3 | 12.5 | 14.9 | 2.8 | 3.8 |
| PGJ8-6 | 6 | 40.8 | 17 | 4.3 | 4 | |||
| PGJ8-10 | 10 | 46.5 | 22.9 | 17.5 | 20.2 | 6 | 8.7 | |
| PGJ8-1/4 | 1/4 | 40.8 | 23.3 | 12.5 | 17 | 4.8 | 4 | |
| PGJ10-4 | 4 | 10 | 42.2 | 28.3 | 12.5 | 14.9 | 2.8 | 4.3 |
| PGJ10-6 | 6 | 43.8 | 17 | 4.3 | 4.5 | |||
| PGJ10-8 | 8 | 43.7 | 24.8 | 14.5 | 18.1 | 6.1 | 5.8 | |
| PGJ10-12 | 12 | 51.2 | 23.5 | 21 | 23.4 | 7.5 | 13 | |
| PGJ10-1/4 | 1/4 | 43.8 | 28.3 | 12.5 | 17 | 4.8 | 4.5 | |
| PGJ10-5/16 | 5/16 | 43.7 | 24.8 | 14.5 | 18.1 | 6.1 | 5.8 | |
| PGJ12-6 | 6 | 12 | 48.8 | 33.5 | 14.5 | 17 | 4.3 | 6 |
| PGJ12-8 | 8 | 49.7 | 18.1 | 6.1 | 6.7 | |||
| PGJ12-10 | 10 | 50 | 28.8 | 17.5 | 20.2 | 8.1 | 9.6 | |
| PGJ12-1/4 | 1/4 | 48.8 | 33.5 | 14.5 | 17 | 4.8 | 5.9 | |
| PGJ12-5/16 | 5/16 | 49.7 | 18.1 | 6.1 | 6.7 | |||
| PGJ12-3/8 | 3/8 | 50 | 28.8 | 17.5 | 20.2 | 8.1 | 9.7 | |
| PGJ16-10 | 10 | 16 | 55.2 | 30.8 | 21 | 20.2 | 8.1 | 15 |
| PGJ16-12 | 12 | 55.4 | 23.4 | 10 | 16 | |||
| PGJ1/4-5/32 | 5/32 | 1/4 | 37.7 | 22.3 | 10 | 14.9 | 2.8 | 3 |
| PGJ5/16-5/32 | 5/32 | 5/16 | 40.2 | 23.3 | 12.5 | 14.9 | 2.8 | 3.8 |
| PGJ5/16-1/4 | 1/4 | 40.8 | 17 | 4.8 | 4 | |||
| PGJ3/8-1/4 | 1/4 | 3/8 | 43.8 | 28.3 | 12.5 | 17 | 4.8 | 4.3 |
| PGJ3/8-5/16 | 5/16 | 43.7 | 24.8 | 14.5 | 18.1 | 6.1 | 5.6 | |
| PGJ1/2-1/4 | 1/4 | 1/2 | 48.8 | 33.5 | 14.5 | 17 | 4.8 | 6.5 |
| PGJ1/2-5/16 | 5/16 | 49.7 | 18.1 | 6.1 | 7.3 | |||
| PGJ1/2-3/8 | 3/8 | 50 | 28.8 | 17.5 | 20.2 | 8.1 | 11 |
After installation, you can change the take-off angle of the resin body.
Allows centralized piping.
The triple types (PKD, PKG, PKJ) and twin triple types (PKVD, PKVG) enable compact, centralized piping.
We offer a clean washing specification suitable for various particle- and oil-averse production processes. (Optional setting for clean room packaging specification) The product is vacuum sealed after ultrasonic vacuum cleaning with HFE (hydrofluoroether) in a clean room.
The lock claw evenly grips the circumference of the tube. Even after many years, tubes still attach and detach like new.
Unique elastic sleeve design shuts out air leaks.
Industry-leading range of variations
A wide assortment of different-diameter sizes is available. One fitting can be used where traditionally two fittings were required.
By reducing the number of fittings used, you can reduce costs and space.
We offer a clean room packaging specification, which is suited to piping in a clean environment. (option)
The product uses fluorochemical grease and is cleaned with clean air before being packaged in a clean room(equivalent to ISO Class 6).
The seal part uses a unique elastic sleeve that shuts out air leaks.
When release ring has been pushed
Push the release ring to collapse and hide the lock claw.
Normal state
The lock claw evenly grips the circumference of the tube. Removal and refitting feels almost the same as the first insertion.
When you release your finger from the release ring, the fine ridges of the lock claw come into view.