For General Piping, Mini-Type Tube Fitting, Union Elbow
Caution
Product Description
[Features]
· Ultra-small one-touch fitting for general pneumatic pipes.
· Reduced size with a volume ratio of 40% over the standard type.
· Elliptical release ring allows easy tube release.
· The 1.8 mm diameter type is an industry-first minimum one-touch type.
· Optimum for piping of small actuators, etc.
· Light gray types and clean room packaged types optionally available.
· Clean room packaging specifications define the use of fluorinated grease.
· After purification with clean air, the item is package in an ISO Class 6-equivalent clean room that has been purified with clean air.
Now 40% Smaller By Volume Compared To Standard Type
Appearance of Mini Type PV
Dimensional drawing of Mini Type PV
Dimensional drawing of Mini Type PV
Specifications
| Usable Fluids | Air |
|---|---|
| Maximum Operating Pressure | 1.0 MPa |
| Operating Vacuum Pressure | -100 kPa |
| Operating Temperature Range | 0 to 60°C (no freezing) |
Tube Size
| Millimeter Size (mm) | ø1.8, ø2, ø3, ø4, ø6 |
|---|---|
| Inch Size | ø1/8, ø5/32, ø1/4 |
Thread Size
| Metric Male Thread | M3 × 0.5, M5 × 0.8, M6 × 1 |
|---|---|
| Taper Pipe Male Thread | R1/8, R1/4, R3/8 |
| Metric Female Thread | M3 × 0.5, M5 × 0.8 |
| Format | Tube Outer Diameter øD | øP | Tube End C | E | F | T | X (øX) | Y | Effective Cross-Sectional Area (mm2) | Mass (g) |
|---|---|---|---|---|---|---|---|---|---|---|
| PV180M (4) | 1.8 | 6 | 8.4 | 10.3 | 4.5 | 6 | 4.8 | - | 0.7 | 1.2 |
| PV2M (4) | 2 | 6 | 8.4 | 10.3 | 4.5 | 6 | 4.8 | - | 0.7 | 1.1 |
| PV3M (4) | 3 | 6 | 9.3 | 10.8 | 4.5 | 6 | 7 | 6 | 2.3 | 1.2 |
| PV4M (4) | 4 | 8 | 11 | 13.1 | 5.6 | 8 | 9.8 | 7.8 | 4.8 | 2.3 |
| PV6M (4) | 6 | 10.5 | 11.6 | 15 | 6.6 | 10.5 | 11.8 | 9.8 | 9 | 3.6 |
| PV1/8M (4) | 1/8 | 8 | 11 | 13.1 | 5.6 | 8 | 9.8 | 7.8 | 2.1 | 2.4 |
| PV5/32M (4) | 5/32 | 8 | 11 | 13.1 | 5.6 | 8 | 9.8 | 7.8 | 4.8 | 2.3 |
| PV1/4M (4) | 1/4 | 10.5 | 11.4 | 15.2 | 6.6 | 10.5 | 11.8 | 9.8 | 10.7 | 3.4 |
Unit: mm
Comparison between Mini and Standard
Easy attachment and detachment of tubes despite ultra-compact size. The release ring features an oval shape.
Since its initial launch, the Mini has featured an easy-to-use oval-shaped release ring.
The Standard features a circular release ring, while the Mini's is oval-shaped. This feature is intended to improve ease-of-use.
We offer one-touch fittings for ultra-thin tube piping.
The sizes ø1.8 (diameter 1.8 mm) and ø2 mm (diameter 2 mm) are ideal for piping to small actuators, etc.