For General Piping, Mini-Type Tube Fitting, Union Tees

Brand :
PISCO
Caution
Product Description
Volume successfully reduced by 40% versus the standard type.
Now 40% Smaller By Volume Compared To Standard Type

Appearance of Mini Type PE

Dimensional drawing of Mini Type PE

Dimensional drawing of Mini Type PE
Specifications
| Usable Fluids | Air |
|---|---|
| Maximum Operating Pressure | 1.0 MPa |
| Operating Vacuum Pressure | -100 kPa |
| Operating Temperature Range | 0 to 60℃ (no freezing) |
Tube Size
| Millimeter Size (mm) | ø1.8, ø2, ø3, ø4, ø6 |
|---|---|
| Inch Size | ø1/8, ø5/32, ø1/4 |
Thread Size
| Metric Male Thread | M3 × 0.5, M5 × 0.8, M6 × 1 |
|---|---|
| Taper Pipe Male Thread | R1/8, R1/4, R3/8 |
| Metric Female Thread | M3 × 0.5, M5 × 0.8 |
| Format | Tube Outer Diameter øD | B | øP | Tube End C | E | F1 | F2 | T | X (oX) | Y | Effective Cross-Sectional Area (mm2) | Mass (g) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PE180M | 1.8 | 10.3 | 6 | 8.4 | 10.25 | 9 | 4.5 | 6 | 4.8 | - | 0.6 | 1.7 |
| PE2M | 2 | 10.3 | 6 | 8.4 | 10.25 | 9 | 4.5 | 6 | 4.8 | - | 0.6 | 1.6 |
| PE3M | 3 | 10.8 | 6 | 9.3 | 10.8 | 9 | 4.5 | 6 | 7 | 6 | 1.9 | 1.7 |
| PE4M | 4 | 13.1 | 8 | 11 | 13.05 | 11.2 | 5.6 | 8 | 9.8 | 7.8 | 4.6 | 3.3 |
| PE6M | 6 | 15 | 10.5 | 11.6 | 14.95 | 13.2 | 6.6 | 11 | 11.8 | 9.8 | 8.9 | 5.3 |
| PE1/8M | 1/8 | 13.1 | 8 | 11 | 13.05 | 11.2 | 5.6 | 8 | 9.8 | 7.8 | 2.1 | 3.4 |
| PE5/32M | 5/32 | 13.1 | 8 | 11 | 13.05 | 11.2 | 5.6 | 8 | 9.8 | 7.8 | 4.6 | 3.3 |
| PE1/4M | 1/4 | 15.2 | 10.5 | 11.4 | 15.15 | 13.2 | 6.6 | 11 | 11.8 | 9.8 | 11.4 | 5 |

Comparison between Mini and Standard
Easy attachment and detachment of tubes despite ultra-compact size. The release ring features an oval shape.

Since its initial launch, the Mini has featured an easy-to-use oval-shaped release ring.
The Standard features a circular release ring, while the Mini's is oval-shaped. This feature is intended to improve ease-of-use.

We offer one-touch fittings for ultra-thin tube piping.
The sizes ø1.8 (diameter 1.8 mm) and ø2 mm (diameter 2 mm) are ideal for piping to small actuators, etc.