for Corrosion Resistance, SUS316 Fitting, Elbow
Brand :
PISCO
Caution
Product Description
All metal parts and materials use SUS316 to provide excellent rust resistance.
Tube Fitting Stainless SUS316 - Elbow Specifications
Elbow appearance
Elbow dimensional drawing (metric thread)
Elbow dimensional drawing (for taper pipe thread)
Usable fluids: air, water (see conditions*), other (see conditions*)
Maximum operating pressure: 1.0 MPa
Operating vacuum pressure: -100 kPa
Operating temperature range: -15 to +120°C (no freezing)
- *When the fluid used is water or other chemicals, the following conditions must be observed.
- 1. When using water or other liquids, make sure the surge pressure stays below the maximum operating pressure.
- 2. Be sure to use an insert ring when using water or other liquids.
- 3. For chemicals, mixed gases, etc., compliance with the specifications may vary depending on usage conditions, so please check before using.
Compatible sizes
Tube size
Millimeter size: ø4 (diameter 4 mm), ø6 (diameter 6 mm), ø8 (diameter 8 mm), ø10 (diameter 10 mm), ø12 (diameter 12 mm), ø16 (diameter 16 mm)
Thread size
Metric thread: M5 × 0.8
Taper pipe thread: R1/8, R1/4, R3/8, R1/2
| Format | Tube Outer Diameter øD | R | A | B | L | C | Hex H | øP | E | Effective Cross-Sectional Area (mm2) | Mass (g) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| SSL4-M5 (4) (6) | 4 | M5 × 0.8 | 3 | 17 | 18.9 | 18.4 | 10 | 9.8 | 22.4 | 3 | 12 |
| SSL4-01 (4) (5) (6) | R1/8 | 8 | 19 | 19.9 | 3.8 | 14 | |||||
| SSL6-M5 (4) (6) | 6 | M5 × 0.8 | 3 | 19 | 21.9 | 19.6 | 12 | 11.8 | 23.6 | 3 | 18 |
| SSL6-01 (4) (5) (6) | R1/8 | 8 | 20.5 | 22.4 | 11.8 | 19 | |||||
| SSL6-02 (4) (5) (6) | R1/4 | 11 | 23 | 22.9 | 14 | 10 | 26 | ||||
| SSL8-01 (4) (5) (6) | 8 | R1/8 | 8 | 23 | 25.9 | 21.9 | 14 | 13.8 | 26.4 | 21 | 26 |
| SSL8-02 (4) (5) (6) | R1/4 | 11 | 25 | 20.5 | 30 | ||||||
| SSL10-02 (4) (5) (6) | 10 | R1/4 | 11 | 28.5 | 30.9 | 25.5 | 17 | 16.8 | 30.5 | 28 | 42 |
| SSL10-03 (4) (5) (6) | R3/8 | 12 | 30.6 | 49 | |||||||
| SSL12-03 (4) (5) (6) | 12 | R3/8 | 12 | 30 | 33.6 | 27.4 | 21 | 19.8 | 33.4 | 52 | 65 |
| SSL12-04 (4) (5) (6) | R1/2 | 15 | 34 | 35.7 | 22 | 49.5 | 85 | ||||
| SSL16-04 (4) (5) (6) | 16 | R1/2 | 15 | 36 | 39.7 | 32.7 | 24 | 23.7 | 40.7 | 68.8 | 99 |
Units: mm
- *Taper thread type L dimensions are reference dimensions after tightening with screws.
- *For (4) in the order format, input -X if you want the fluorochemical grease specification.
- *For (5) in the order format, input -TP if you want the sealing tape specification.
- *For (6) in the order format, input -C if you want the clean room packaging specification.