Corrosion-Resistant SUS316 Fitting, Straight
Brand :
PISCO
Caution
Product Description
All metal parts and materials use SUS316 for excellent rust resistance.
Tube Fitting Stainless SUS316 - Straight Specifications
Tube Fitting Stainless SUS316 - Straight appearance
Dimensional drawing for metric thread
Dimensional drawing for taper pipe thread
Usable fluids: air, water (see conditions*), other (see conditions*)
Maximum operating pressure: 1.0 MPa
Operating vacuum pressure: -100 kPa
Operating temperature range: -15 to 120°C (no freezing)
- *When the fluid used is water or other chemicals, the following conditions must be observed.
- 1. When using water or other liquids, make sure the surge pressure stays below the maximum operating pressure.
- 2. When using water or other liquids, be sure to use an insert ring (see p. 858 of catalog).
- 3. For chemicals, mixed gases, etc., compliance with the specifications may vary depending on usage conditions, so please check before using.
Compatible Sizes
- Tube Size
Millimeter size: φ4 (diameter 4 mm), φ6 (diameter 6 mm), φ8 (diameter 8 mm), φ10 (diameter 10 mm), φ12 (diameter 12 mm), φ16 (diameter 16 mm)
- Thread size
Metric thread: M5×0.8
Taper pipe thread: R1/8, R1/4, R3/8, R1/2
| Format | Tube Outer Diameter φD | R | A | B | L | C | Hex H | φP | Effective Cross-Sectional Area (mm2) | Mass (g) |
|---|---|---|---|---|---|---|---|---|---|---|
| SSC4-M5 (4) (6) | 4 | M5 × 0.8 | 3 | 24.4 | 21.4 | 18.4 | 10 | 9.8 | 3 | 6 |
| SSC4-01 (4) (5) (6) | R1/8 | 8 | 27.4 | 23.4 | 5 | 8.7 | ||||
| SSC6-M5 (4) (6) | 6 | M5 × 0.8 | 3 | 25.6 | 22.6 | 19.6 | 12 | 11.8 | 3 | 8.4 |
| SSC6-01 (4) (5) (6) | R1/8 | 8 | 27.6 | 23.7 | 13.5 | 9.9 | ||||
| SSC6-02 (4) (5) (6) | R1/4 | 11 | 31.6 | 25.6 | 14 | 13.8 | 18 | |||
| SSC8-01 (4) (5) (6) | 8 | R1/8 | 8 | 30.9 | 27 | 21.9 | 14 | 13.8 | 20.5 | 12 |
| SSC8-02 (4) (5) (6) | R1/4 | 11 | 33.9 | 27.9 | 26.8 | 18 | ||||
| SSC10-02 (4) (5) (6) | 10 | R1/4 | 11 | 36 | 30 | 25.5 | 17 | 16.8 | 27.5 | 22 |
| SSC10-03 (4) (5) (6) | R3/8 | 12 | 38 | 31.7 | 28.5 | 29 | ||||
| SSC12-03 (4) (5) (6) | 12 | R3/8 | 12 | 39.9 | 33.6 | 27.4 | 21 | 19.8 | 45.5 | 37 |
| SSC12-04 (4) (5) (6) | R1/2 | 15 | 42.9 | 34.7 | 22 | 51.8 | 55 | |||
| SSC16-04 (4) (5) (6) | 16 | R1/2 | 15 | 49.7 | 41.6 | 32.7 | 24 | 23.7 | 79.8 | 59 |
Unit: mm
- *Taper thread type L dimensions are reference dimensions after tightening with screws.
- *For (4) in the order format, input -X if you want the fluorochemical grease specification.
- *For (5) in the order format, input -TP if you want the sealing tape specification.
- *For (6) in the order format, input -C if you want the clean room packaging specification.