Pneumatic Cylinder 10A-6 Series
Caution
Product Description
Full model change.
[Features]
· Uses a new cushion valve model.
· Floating sealing is used in the cushion part.
· Large sintered oil-impregnated copper alloy bearings.
· Inlay boss used for rod cover and head cover.
· Rod diameter are available in versatile sizes used in Japan.
· JPAS standards used for rod sealing and piston sealing.
Product Specifications
Cylinder Specifications / Standard
| Structure | Double acting, single rod | Double acting, double rod | |||
|---|---|---|---|---|---|
| Type | Standard type | Ball set | Standard type | Ball set | |
| Series | 10 A-6 | 10 A-6V | 10 A-6D | 10 A-6VD | |
| Cylinder inner diameter (mm) | ⌀32·⌀40·⌀50·⌀63 ⌀80·⌀100·⌀125 | ⌀40·⌀50·⌀63·⌀80 ⌀100 | ⌀32·⌀40·⌀50·⌀63 ⌀80·⌀100·⌀125 | ⌀40·⌀50·⌀63·⌀80 ⌀100 | |
| Operating Fluid | Air | ||||
| Lubrication | Not required (can be lubricated) | ||||
| Operating Pressure Range | 0.05 to 1 MPa | 0.17 to 0.7 MPa | 0.1 to 1 MPa | 0.17 to 0.7 MPa | |
| Pressure resistance | 1.5 MPa | 1.05 MPa | 1.5 MPa | 1.05 MPa | |
| *1: operating speed range | ø32: 30 to 800 mm/s ø40 to ø125: 30 to 700 mm/s | ø32: 50 to 800 mm/s ø40 to ø125: 50 to 700 mm/s | |||
| Operating temperature range | -10 to +70°C (No freezing) | +5 to +50°C | -10 to +70°C (No freezing) | +5 to +50°C | |
| Cushion mechanism | With cushions on both sides (With a detent mechanism) | ||||
| Cushion stroke (parallel length of cushion ring) | ø32, ø40: 16 mm; ø50, ø63: 20 mm; ø80, ø100, ø125: 25 mm | ||||
| Thread tolerance | JIS 6g/6H | ||||
| Stroke Length Tolerance | 250 mm or less: (0 to +1.0) 251 to 1,000 mm: (0 to +1.5) 1,001 mm or more: (0 to +2.0) | ||||
| Support Model | SD·LA·LB·FA·FB CA·CC·CB·TC | SD·LA·LB·FA·TC | |||
| Related Parts | Dust-Proof Cover | Nylon tarpaulin | |||
| Tip Metal Fitting | With 1-mountain spherical bearing (S destination), 1-mountain (T destination), 2-mountain (Y destination) with a pin, F-joint (F destination) | ||||
| Other | Bracket for CB / Bracket for TC | Bracket for TC | |||
*1. When setting the switch in the intermediate position, the cylinder speed should be within 300 mm/s in relation to the response speed of the load relay, etc.
Caution: Please note that the former 10A-5 series metal fittings cannot be attached to the 10A-6 series.
Cylinder Specifications / Rotation-Less
| Structure | Double acting, single rod | Double acting, double rod | |||
|---|---|---|---|---|---|
| Type | Standard type | Ball set | Standard type | Ball set | |
| Series | 10 A-6G | 10 A-6VG | 10 A-6GD | 10 A-6VGD | |
| Cylinder inner diameter (mm) | ⌀40·⌀50·⌀63·⌀80·⌀100 | ||||
| Operating Fluid | Air | ||||
| Lubrication | Not required (can be lubricated) | ||||
| Operating Pressure Range | 0.1 to 1 MPa | 0.17 to 0.7 MPa | 0.15 to 1 MPa | 0.17 to 0.7 MPa | |
| Pressure resistance | 1.5 MPa | 1.05 MPa | 1.5 MPa | 1.05 MPa | |
| *1: operating speed range | 50 to 500 mm/s | ||||
| Operating temperature range | -10 to +70°C (No freezing) | +5 to +50°C | -10 to +70°C (No freezing) | +5 to +50°C | |
| Cushion mechanism | With cushions on both sides (With a detent mechanism) | ||||
| Cushion stroke (parallel length of cushion ring) | ø40: 16 mm; ø50, ø63: 20 mm; ø80, ø100: 25 mm | ||||
| *2. Rotation angle tolerance | ⌀40:±1° ⌀50·⌀63:±0.8° ⌀80·⌀100:±0.5° | ||||
| Allowable torque | ø40: 1 N⋅m; ø50, ø63: 3.4 N⋅m; ø80, ø100: 10 N⋅m | ||||
| Thread tolerance | JIS6g/6H | ||||
| Stroke Length Tolerance | 250 mm or less: (0 to +1.0) 251 to 500 mm: (0 to +1.5) | ||||
| Support Model | SD·LA·LB·FA·FB CA·CC·CB·TC | SD·LA·LB·FA·TC | |||
| Related Parts | Dust-Proof Cover | Nylon tarpaulin | |||
| Tip Metal Fitting | 1-mountain (T destination), 2-mountain (Y destination) with pin | ||||
| Other | Bracket for CB / Bracket for TC | Bracket for TC | |||
*1. When setting the switch in the intermediate position, the cylinder speed should be within 300 mm/s in relation to the response speed of the load relay, etc.
2. The rotation angle tolerance indicates the clearance in the direction of rotation of the piston rod at the end of the stroke.
3. When using with other guides, please use a round rod.
Valve Specifications for VAL Set
| Rated voltage | 100 V AC | 200 V AC | 24 V DC | |||
|---|---|---|---|---|---|---|
| Operating Voltage Range: V | 90 to 132 | 180 to 264 | 21.6 to 26.4 | |||
| Current (rated voltage at application) | Frequency Hz | 50 | 60 | 50 | 60 | — |
| Starting mA (r.m.s) | 34 | 32 | 17 | 16 | — | |
| Excitation mA (r.m.s) | 22 | 20 | 11 | 10 | 75 (1.8W) | |
| Allowable circuit leakage current value mA | 4 | 2 | 4 | |||
| Insulation Type | Class B | |||||
| Insulation resistance MΩ | 100 or More | |||||
| Protection circuit | — | Flywheel diode | ||||
| DIN terminal type | Indicator light | Yellow | Green | Red | ||
| Terminal No. | No.1, No.2 | No.1 (-), No.2 (+) | ||||
| Lead type | Lead Wire Color | Yellow | White | Black (-), red (+) | ||
Support Model
