Control Unit Compact Solenoid Valve 030 Series
Caution
- [Discontinued Information]Part number: The 030-4E1-81 12 V DC and 030E1-81-PSL 24 V DC will be discontinued in April 2022.
Product Description
An up-and-coming series of pneumatic solenoid valves that achieved compact size, weight reduction, increasing flow rate, and current reduction with advanced technology.
[Features]
·Compatible with drive control of all compact actuators such as double acting and single acting cylinders with a diameter of 6 to 20 mm
·Uses various options and such as a manifold that can be used up to 20 stations with the addition of Rc1/8 specifications
·Expandability to meet high demands is also attractive
[Application]
・ Compatible with pneumatic equipment and production lines in all industries
Product Specifications
Basic form and valve function
| Item | Basic Form | ||
|---|---|---|---|
| Direct piping / T, F, F01 type manifold | 030E1 | 030-4E1 | |
| Number of positions | 2 Positions | ||
| Number of ports | 2-3 ports | 5 ports | |
| Valve Functions | Normally Closed (NC) | Single solenoid | |
| Item | Basic Form | ||
|---|---|---|---|
| Direct piping / T, F, F01 type manifold | 030E1 | 030-4E1 | |
| Operating fluid | Air | ||
| Operating method | Linear Motion Type | Internal Pilot Type | |
| Flow rate characteristics | Sonic conductance C dm^3 / (s*bar)^*1 | 1 (P) ⇒2 (A) 0.12 2 (A) ⇒3 (R) 0.16 | 1 (P) ⇒4 (A), 2 (B) 0.12 4 (A) ⇒5 (R1), 2 (B) ⇒3 (R2) 0.16 |
| Effective cross-sectional area [Cv value] mm^2 | 1 (P) ⇒2 (A) 0.6 [0.03] 2 (A) ⇒3 (R) 0.8 [0.04] | 1 (P) ⇒4 (A), 2 (B) 0.6 [0.03] 4 (A) ⇒5 (R1), 2 (B) ⇒3 (R2) 0.8 [0.04] | |
| Piping connection diameter^*2 | M5 × 0.8 | ||
| Lubrication | Not required | ||
| Operating pressure range MPa | 0 to 0.7 | 0.15 to 0.7 | |
| Proof pressure resistant MPa | 1.05 | ||
| Response time ON / OFF ms | 12 V DC, 24 V DC | 10/25 or less | |
| 100 V AC, 200 V AC | 15/40 or less | ||
| Maximum operating frequency: Hz | 5 | ||
| Operating temperature range (atmosphere and operating fluid)°C | +5 to +50 | ||
| Impact resistance m/s^2 | 117.7 | ||
| Mounting Direction | Free | ||
*1: The value of sonic conductance is a calculated value, not an actual measurement value
Electrical Specifications
| Item | Rated Voltage | ||||||
|---|---|---|---|---|---|---|---|
| 12 V DC | 24 V DC | 100 V AC | 200 V AC | ||||
| Method | Built-in flywheel diode for surge prevention | Shading method | |||||
| Operating Voltage Range: V | 10.8 to 13.2 (12±10%) | 21.6 to 26.4 (24±10%) | 90 to 132 [100 (-10 to +32)%] | 180 to 264 [200 (-10 to +32)%] | |||
| Current (When rated voltage is applied) | Frequency Hz | — | — | 50 | 60 | 50 | 60 |
| Starting mA (r.m.s.) | — | — | 36 | 32 | 18 | 16 | |
| Excitation mA (r.m.s.) | 130 (1.6W) [140 (1.7 W) with LED indicator] | 65 (1.6W) [75 (1.8 W) with LED indicator] | 24 | 20 | 12 | 10 | |
| Allowable circuit leakage current value mA | 8 | 4 | 4 | 2 | |||
| Insulation resistance MΩ | 100 or More | ||||||
| Connection method and lead length | Standard | Grommet type: 300 mm | |||||
| Option | Plug connector type: 300 mm | ||||||
| Lead Wire Color | Brown (+) Black (-) | Red (+) Black (-) | Yellow | White | |||
| Led Indicator Color | Red | Yellow | Green | ||||
| Surge Protection (Standard Equipment) | Flywheel diode | Varistor | |||||
3 ports normally closed (NC)
030E1 (When not energized)
Column, solenoid cover, mold solenoid, plunger, plunger spring, plunger pin, manual button, main body, flapper, shading coil (AC solenoid only)
030E1 (When energized)
5 ports 2 positions normally closed (NC)
030-4E1 (When not energized)
Column, solenoid cover, mold solenoid, plunger, plunger spring, plunger pin, manual button, main body, flapper, diaphragm, shading coil (AC solenoid only)
030-4E1 (When energized)
Product features details
Advanced solenoid valve system can be freely configured
- The 030 series, which emphasizes space saving and cost performance, is based on highly reliable basic functions, and can be freely configured with a wide variety of options, made-to-order products, and an advanced solenoid valve system that makes use of additional parts.
- The solenoid, which is powerful and has a good reputation for low current (example: 36 mA at 100 V AC start-up), is equipped with a varistor for AC and a flywheel diode for DC as standard equipment. Reliable surge resistant design.
- 29 L/min (ANR) Achieves a flow rate at a supply pressure of 0.5 MPa. Flexible expandability and rationality that cover everything from single / direct piping to multiple manifolds are also major features.
- Easy to put on and take off and secure plug connector (optional).
- Two types, straight and L-shaped, are available, both with LED indicators that make it easy to check the operation.
- DIN type connectors and 1,000 mm and 3,000 mm leads can also be made to order.
- Non-lock type manual button with maintenance/ adjustment as standard. A protruding locking manual button (optional) for fingertip operation is also available.
- Since the mounting valve is the same as for a single unit, it can economically respond quickly to changes such as system upgrades and changes in the number of stations.
- If it is only 2-3 ports up to 10 stations, a compact T shape. A rational and detailed selection is possible with the F type for up to 10 stations with a mixture of 2, 3, and 5 ports, and the F01 type with Rc1/8 specification piping ports for 11 or more stations.
Property and performance information / test information
How to find the cylinder speed
When calculating the time required for 1 stroke of the cylinder, add it to the cylinder delay time (the delay time from when the solenoid valve is energized to when the cylinder starts to move) t1 at the time t2 of the maximum speed part. If there is a cushion, add the time t3 of the cushion part. Generally, ta should be about 0.2 seconds.
Maximum drive speed
Delay time
*: Due to the structure of the valve, the delay time varies depending on the volume of the cylinder and piping
Secret story of development
It is a product with combining design know-how and production technology cultivated since the manufacturer founding to meet customer needs, and it is developed after undergoing strict inspection.