Super Rodless Cylinder SRL3 Series
Caution
- Depending on the part number, multiple lead times may be shown for the same model.
- The product images are representative only. Specifications may vary by part number, including shape and color.
Product Description
High load capacity and long lifespan. This is a rodless cylinder capable of high-speed operation. A full lineup of series from ⌀12 to 100, with a wide variety of options.
[Features]
· Flat cylinder: The piston is made flat, adopting a structure that allows the load to be supported by the piston. Excellent load capacity and equipped with an anti-rotation mechanism
· Seal belt: The seal part has been made straight, significantly improving sealing performance.
· Magnet equipped as standard: Switches can be installed directly on the standard type.
· Uses high-speed packing: Equipped with piston packing that can withstand high speeds
· Centralized port: Depending on the installation location of the cylinder, centralized port (one-way piping) and standard port (piping on both sides) can be freely selected. The equipment can be made compact
Drawing
⌀12 to ⌀20 equivalent
Product Specification
| Items | SRL3 | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Tube inner diameter mm | ⌀12 | ⌀16 | ⌀20 | ⌀25 | ⌀32 | ⌀40 | ⌀50 | ⌀63 | ⌀80 | ⌀100 |
| Operation method | Double Acting | |||||||||
| Operating fluid | Compressed Air | |||||||||
| Maximum operating pressure MPa | 0.7 | |||||||||
| Minimum operating pressure MPa | 0.2 | 0.1 | 0.05 | |||||||
| Pressure resistance MPa | 1.05 | |||||||||
| Ambient temperature℃ | 5 to 60 | |||||||||
| Connection port diameter | M5 | Rc 1/8 | Rc 1/4 | Rc 3/8 | Rc 1/2 | |||||
| Stroke tolerance mm | 0 to +2.0 (up to 1,000), 0 to +2.5 (up to 3,000), 0 to +3.0 (up to 5,000) | |||||||||
| Piston Speed (mm/s) | 50 to 2000 (when using standard port piping) | |||||||||
| Cushion | Air cushion | |||||||||
| Lubrication | Not required (If lubrication is necessary, use turbine oil Type 1 ISOVG32. Once lubrication has started, continue to lubricate.) | |||||||||
Internal Structure
⌀12 to ⌀40 Equivalent
Main Parts List
⌀12 to ⌀40 Equivalent
| Product number | Part name | Material | Note | Product number | Part name | Material | Note |
|---|---|---|---|---|---|---|---|
| 1 | Belt cover | polyamide | - | 17 | Hex Socket Head Cap Screw | Steel alloy | Zinc chromate |
| 2 | cover (L) | Aluminum alloy | Baked coating | 18 | Needle gasket | Nitrile Rubber | - |
| 3 | Table cover | polyacetal resin | - | 19 | Cushion needle | Steel | Zinc chromate |
| 4 | Spring | Steel | Black oxide coating | 20 | Plug (⌀12, ⌀16) | Brass | Nickel plating |
| 5 | Belt retainer | polyacetal resin | - | Plug (⌀20 to ⌀40) | Steel | Zinc chromate | |
| 6 | Parallel pin (⌀12 to ⌀20) | Stainless steel | - | 21 | Cushion packing | urethane rubber | - |
| Shaft (⌀25 to ⌀40) | Steel | Zinc chromate | 22 | Piston packing | Nitrile Rubber | - | |
| 7 | table | Aluminum alloy | Anodizing | 23 | Yoke | Aluminum alloy | Anodizing |
| 8 | Seal belt | urethane rubber | - | 24 | Piston | polyacetal resin | - |
| 9 | Dust-proof belt | Stainless steel + nitrile rubber | - | 25 | Cylinder Tube | Aluminum alloy | Anodizing |
| 10 | Magnet | Special alloy | Nickel plating | 26 | Cylinder gasket | Nitrile Rubber | - |
| 11 | Cushion adapter | polyacetal resin | - | 27 | o-ring for central port | Nitrile Rubber | - |
| 12 | Cover (R) | Aluminum alloy | Baked coating | 28 | Dust Wiper | polyacetal resin | - |
| 13 | Belt Spacer | Steel | Zinc chromate | 29 | Double-sided tape | - | - |
| 14 | Hex Socket Head Set Screw | Steel alloy | Zinc chromate | 30 | Plate | Stainless steel (Hole Diameter 12 to 20) | - |
| 15 | Hex Socket Head Cap Screw | Steel alloy | Zinc chromate | Steel alloy (⌀25 to ⌀40) | Zinc chromate | ||
| 16 | Hex Socket Head Cap Screw | Stainless steel | - | 31 | Cross-recessed self-tapping screw | Stainless steel | - |
Specifications Table
⌀12 to ⌀20 equivalent
