[In Stock] Pilot kick type 2-port solenoid valve general-purpose valve APK11 series
Caution
- When selecting the body/seal material combination, please note that the recommended specifications are listed in the remarks column on page 294 of the catalog.
Product Description
Piston-driven pilot kick type 2-port solenoid valve.
[Features]
・ Fluid: It can be used for air, low vacuum (1.33 × 103 Pa (abs)), water, kerosene, oil (20 mm2/s or less), and steam.
・ IP65 specifications can also be selected.
・ Water/air/oil/vacuum: General-purpose valve series that controls various types of fluids.
[Applications]
・ For fluid control
General-purpose valve series for controlling various types of fluids
Common specifications
| Fine | Standard Specifications | Optional Specifications |
|---|---|---|
| Operating fluid | Air / low vacuum (1.33×103Pa (abs)) / Water / Kerosene / Oil (20 mm2/s or less) | Steam |
| Operating pressure differential MPa | 0 to 1.0 (It varies depending on the type, so please refer to the maximum operating pressure differential by model.) | |
| Maximum operating pressure MPa | 2 | 1 |
| Pressure resistance (at water pressure) MPa | 4 | |
| Fluid temperature°C | -10 to 60 (Note 1) | 5 to 180 |
| Ambient temperature°C | -10 to 60 | |
| Heat-resistant class | Class 130 (B) | Class 180 (H) |
| Environment | No Corrosive or Explosive Gases in Surroundings | |
| Valve Structure | Pilot kick-type poppet structure, piston driven | |
| Valve seat leakage (*2) cm3/min (ANR) | 0.2 or less (with air) | 400 or less (with air) |
| Mounting posture | Limited to vertical posture with the coil facing upward (Note 3) | |
| Body/Seal material | Bronze/Nitrile Rubber | Bronze/PTFE |
Model-specific specifications
| Model number | |||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Fine | Connection port diameter | Orifice diameter (mm) | Minimum operating pressure difference (MPa) | Maximum Operating Pressure Differential (MPa) | Rated Voltage | Apparent power (VA) | Power consumption (W) | Weight (kg) | |||||||||||||||
| Air | Water, kerosene | Oil (20 mm2/s) | Steam | During retaining | Starting | AC 50/60 Hz | DC | ||||||||||||||||
| AC | DC | AC | DC | AC | DC | AC | 50 Hz | 60 Hz | 50 Hz | 60 Hz | |||||||||||||
| APK11-8A | Rc1/4 | 12 | 0 | 1.0 | 0.7 | 1.0 | 0.7 | 0.7 | 0.6 | 1.0 | 100 V AC 50/60 Hz *5 200 V AC 50/60 Hz *5 DC12V DC24V DC48V DC100V | 24 | 19 | 61 | 54 | 10/8 | 11 | 0.7 | |||||
| APK11-10A | Rc3/8 | 12 | 0.7 | ||||||||||||||||||||
| APK11-15A | Rc1/2 | 16 | 0.6 | 0.6 | 0.5 | 32 | 26 | 123 | 106 | 13/11 | 20 | 1.0 | |||||||||||
| APK11-20A | Rc3/4 | 23 | 1.3 | ||||||||||||||||||||
| APK11-25A | Rc1 | 28 | 1.7 | ||||||||||||||||||||
*1: The above model number indicates up to the basic connection port diameter. For other combinations, please refer to the model number indication method.
*2: For the maximum operating pressure differential of the diode built-in coil, please refer to the DC column.
*3: Please keep the voltage fluctuation within +/- 10% of the rated voltage.
*4: When used in low vacuum, evacuate the OUT port side.
Flow rate characteristics
| Model number | Connection port diameter | Orifice diameter (mm) | Flow rate characteristics | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| C [dm3/ (s·bar)] | b | Cv value | S (mm2) | ||||||||
| APK11-8A | Rc1/4 | 12 | 9.4 | 0.41 | 2.2 | — | |||||
| APK11-10A | Rc3/8 | 12 | 15 | 0.37 | 2.7 | — | |||||
| APK11-15A | Rc1/2 | 16 | 20 | 0.31 | 4.5 | — | |||||
| APK11-20A | Rc3/4 | 23 | — | — | 8.6 | 162 | |||||
| APK11-25A | Rc1 | 28 | — | — | 12 | 231 | |||||
APK11 external appearance
Internal structure of APK11-8A/10 A (AC)
Internal structure of APK11-8A/10 A (DC, built-in diode)
APK11 parts list
| Product number | Part name | Material | Material | ||||||
|---|---|---|---|---|---|---|---|---|---|
| 1 | Core assembly | Equivalent to SUS405/316 L/403 *1 | Stainless steel | ||||||
| 2 | Shading coil *2 | Cu (Ag for stainless steel body) | Copper (Silver when the body is stainless steel) | ||||||
| 3 | Coil | — | — | ||||||
| 4 | Plunger assembly | Equivalent to SUS405, SUS304, NBR (Equivalent to SUS405, SUS304, FKM, PFA or PTFE) | Stainless steel | ||||||
| 5 | plunger spring | SUS304 | Stainless steel | ||||||
| 6 | Kick Spring | SUS304 | Stainless steel | ||||||
| 7 | Stuffing | CAC408 (SCS13) | bronze casting (stainless cast steel) | ||||||
| 8 | Seal | NBR (FKM, PTFE) | Nitrile rubber (fluoroelastomer or tetrafluoroethylene resin) | ||||||
| 9 | Main valve assembly | SUS303, SUS304, NBR (SUS303, SUS304, FKM or PTFE) | Stainless steel | ||||||
| 10 | Seal ring set | SUS304; PTFE | Stainless steel; tetrafluoroethylene resin | ||||||
| 11 | Body | CAC408 (SCS13) | bronze casting (stainless cast steel) | ||||||
| 12 | O-ring | NBR (FKM, PTFE) | Nitrile rubber (fluoroelastomer or tetrafluoroethylene resin) | ||||||
Items in ( ) are options
*1: When the combination of body and seal materials is other than O or H: Equivalent to SUS405, SUS316L, SUS430
*2: For DC coils or diode built-in coils, the shading coil is not used.
Internal structure of APK11-15A, 20 A, 25 A (AC)
Internal structure of APK11-15A, 20 A, 25 A (DC, with built-in diode)
APK11 parts list
| Product number | Part name | Material | Material | ||||||
|---|---|---|---|---|---|---|---|---|---|
| 1 | Core assembly | Equivalent to SUS405/316 L/403 *1 | Stainless steel | ||||||
| 2 | Shading coil *2 | Cu (Ag for stainless steel body) | Copper (Silver when the body is stainless steel) | ||||||
| 3 | Coil | — | — | ||||||
| 4 | Plunger assembly | Equivalent to SUS405, SUS304, NBR (Equivalent to SUS405, SUS304, FKM, PFA or PTFE) | Stainless steel | ||||||
| 5 | plunger spring | SUS304 | Stainless steel | ||||||
| 6 | Kick Spring | SUS304 | Stainless steel | ||||||
| 7 | Stuffing | CAC408 (SCS13) | bronze casting (stainless cast steel) | ||||||
| 8 | Seal | NBR (FKM, PTFE) | Nitrile rubber (fluoroelastomer or tetrafluoroethylene resin) | ||||||
| 9 | Main valve assembly | SUS303, SUS304, NBR (SUS303, SUS304, FKM or PTFE) | Stainless steel | ||||||
| 10 | Seal ring set | SUS304; PTFE | Stainless steel; tetrafluoroethylene resin | ||||||
| 11 | Body | CAC408 (SCS13) | bronze casting (stainless cast steel) | ||||||
| 12 | O-ring | NBR (FKM, PTFE) | Nitrile rubber (fluoroelastomer or tetrafluoroethylene resin) | ||||||
Items in ( ) are options
*1: When the combination of body and seal materials is other than O or H: Equivalent to SUS405, SUS316L, SUS430
*2: For DC coils or diode built-in coils, the shading coil is not used.
Dimensional drawing of APK11-8A, 10 A-※2C
*1: The external dimensions are the same for G and NPT thread connection port diameters.
Dimensional drawing of APK11-15A, 20 A, 25 A-※2C
*1: The external dimensions are the same for G and NPT thread connection port diameters.
| Type number | A | B | C | D | E | F | G | |||
|---|---|---|---|---|---|---|---|---|---|---|
| APK11-15A-**2C | 71 | 27 (29) | 14.5 | 89 | 119.5 | 50 | Rc1/2 | |||
| APK11-20 A-**2C | 80 | 32 (35) | 17.5 | 93 | 126.5 | 60 | Rc3/4 | |||
| APK11-25A-※2C | 90 | 41 (45) | 21.5 (22.5) | 99 | 136.5 (137.5) | 71 | Rc1 | |||
*2: Dimensions in parentheses are for when the body material is stainless steel.