Pilot kick type 2-port solenoid valve general-purpose valve ADK11/ADK12 series

Brand :

CKD

Caution

The product images are representative only. Specifications may vary by part number, including shape and color.

Product Description

Pilot kick type 2-port solenoid valve.
[Features]
· General-purpose valve series for controlling various types of fluids.
· Because it is reliable, high quality, rich in variation and options, it surely enhances high performance of various facilities and equipment.
· By combining body materials and sealants, it can be used for a wide variety of fluids.
· NC (normally closed, open when energized) type, NO (normally open, closed when energized) type
· Connection port diameter: Rc1/4 to Rc1, G1/2, G3/4, NPT3/4
· Diaphragm type drive

Pilot Kick Type 2-Port Solenoid Valve (General-Purpose Valve) ADK11/12 Series Specifications

Product Specification

Items	Standard Specifications	Optional Specifications
Operating fluid	Air / low vacuum (1.33 x 10³ Pa (abs)) / Water / Kerosene / Oil (50 mm²/s or less)	Warm water
Operating pressure differential range MPa	0 to 1.0 (It varies depending on the type, so please refer to the maximum operating pressure differential per model.)
Maximum operating pressure MPa	2
Pressure resistance (at water pressure) MPa	4
Fluid temperature (Note 1)°C	-10 to 60	-10 to 90
Ambient temperature°C	-10 to 60
Heat-resistant class	Class 130 (B)	Class 180 (H)
Environment	No Corrosive or Explosive Gases in Surroundings
Valve Structure	Pilot kick-type poppet structure, diaphragm drive
Valve seat leakage (*2) cm³/min (ANR)	1 or less (with air)
Mounting posture	Free
Body/Seal material	Bronze/Nitrile Rubber	Bronze/Ethylene propylene rubber

*1: No freezing.
*2: However, it is the value when the pneumatic pressure is 0.02 to 1.0 MPa for ADK11 (NC (normally open) type), and when the pneumatic pressure is 0.02 to 0.6 MPa for ADK12 (NO (normally closed) type). If used at less than 0.02 MPa, the seal will become unstable.

Product Specification

Model number	Items
	Connection port diameter	Orifice diameter (mm)	Minimum operating pressure difference (MPa)	Maximum operating pressure differential (MPa)						Rated Voltage	Apparent power (VA)				Power consumption (W)		Weight (kg)
				Air		Water, kerosene		Oil (50 mm²/s)			During retaining		Starting		AC 50 Hz/60 Hz	DC
				AC	DC	AC	DC	AC	DC		50 Hz	60 Hz	50 Hz	60 Hz	AC 50 Hz/60 Hz	DC
NC (energized open) type
ADK11-8A	Rc1/4	12	0	1	0.7	1	0.7	0.7	0.6	100 V AC 50/60 Hz^8 200 V AC 50/60 Hz^8 DC12V DC24V DC48V DC100V	24	19	61	54	10/8	11^*2 (10.4)	0.65
ADK11-10A	Rc3/8	12			0.7		0.7	0.7	0.6		24	19	61	54	10/8	11^*2 (10.4)	0.65
ADK11-15A	Rc1/2	16			0.6		0.6	0.6	0.5		25	21	84	75	10/8.5	14^*3 [17]	0.9
ADK11-20A	Rc3/4	23															1.0
ADK11-25A	Rc1	28															1.4
NO (closed when energized) type
ADK12-15A	Rc1/2	16	0	0.6	0.6	0.6	0.6	0.5	0.5		30	25	180	150	13/11	14	1.0
ADK12-20A	Rc3/4	23															1.2
ADK12-25A	Rc1	28															1.6

*1: The above model number indicates up to the basic connection port diameter (Rc).
*2: The values in ( ) indicate the power consumption when equipped with a DIN terminal box.
*3: The values in [ ] indicate the power consumption for the diode built-in coil.
*4: For the maximum operating pressure differential of the diode built-in coil, please refer to the DC column.
*5: Please keep the voltage fluctuation within +/- 10% of the rated voltage.
*6: If the pressure is 0.02 MPa or less, please consider the AB71 series.
*7: When using in low vacuum, evacuate from the OUT port side.
*8: 100 V AC (50/60 Hz) can also be used with 110 V AC (60 Hz). 200 V AC (50/60 Hz) can also be used with 220 V AC (60 Hz). Coil housings 5A, 5M, 5N, 5I, and 5J are excluded.

ADK11 Series Dimensions

· Grommet lead wire type

ADK11-8A, 10 A-*2C

Drawing

Note 1: The external dimensions are the same for connection port diameter G and NPT screws.

ADK11-15A, 20 A, 25 A-*2C

Drawing

Note 1: The external dimensions are the same for connection port diameter G and NPT screws.
Note 2: Dimensions in ( ) are for body material SUS

Type number	A	B	C	D	E	F	G
ADK11-15A-02C	71	27 (29)	14.5	75.5	102	50	Rc1/2
ADK11-20A-02C	80	32 (35)	17.5	79	108.5	60	Rc3/4
ADK11-25A-02C	90	41 (45)	21.5 (22.5)	84.5	118 (119)	71	Rc1

ADK12 Series Dimensions

· Open Frame Lead Wire Type

ADK12-15A, 20 A, 25 A-*3 A

Drawing

Note 1: The external dimensions are the same for connection port diameter G and NPT screws.

Type number	A	B	C	D	E	F	G
ADK12-15A-03A	71	27 (29)	14.5	77	134.5	50	Rc1/2
ADK12-20A-03A	80	32 (35)	17.5	80.5	141	60	Rc3/4
ADK12-25A-03A	90	41 (45)	21.5 (22.5)	86	150.5 (151.5)	71	Rc1