Mini Clamp Lever (MKF, MKR)
Brand :
IMAO
Caution
Product Description
In this type of lever handle, when the lever is pulled, the serrations engaged with each other are disengaged. Mini type with small turning radius.
Mini Clamp Lever (MKF, MKR)
Dimensional Drawing
| Size | M | No. of Teeth | Standard (Applicable Tool Size) | ||
|---|---|---|---|---|---|
| Flathead Screwdriver | Torx | ||||
| MKF MKR | 3 | M3 × 0.5 | 16 | (-) 5.5 | T20 |
| 4 | M4 × 0.7 | ||||
| 5 | M5 × 0.8 | ||||
Tapped
| Part Number | Weight (g) |
|---|---|
| MKF3-** | 36 |
| MKF4-** | |
| MKF5-** |
Stud
| Part Number | L | Weight (g) |
|---|---|---|
| MKR4×10-** | 10 | 29 |
| MKR4×15-** | 15 | 30 |
| MKR4×20-** | 20 | 31 |
| MKR4×25-** | 25 | 32 |
| MKR4×30-** | 30 | 33 |
| MKR4×35-** | 35 | 34 |
| MKR4×40-** | 40 | 35 |
| MKR4×45-** | 45 | 36 |
| MKR4×50-** | 50 | 37 |
| MKR5×10-** | 10 | 29 |
| MKR5×15-** | 15 | 30 |
| MKR5×20-** | 20 | 31 |
| MKR5×25-** | 25 | 32 |
| MKR5×30-** | 30 | 33 |
| MKR5×35-** | 35 | 34 |
| MKR5×40-** | 40 | 35 |
| MKR5×45-** | 45 | 36 |
| MKR5×50-** | 50 | 37 |
Stud-Type Tightening Capacity
Stud-type tightening capacity measurement diagram
| Size | MKR | |
|---|---|---|
| 4 | 5 | |
| Thread Diameter | M4 | M5 |
| Turning Radius (mm) | 30 | 30 |
| Load Capacity (N) | 70 | 135 |
| Allowable Tightening Force (kN) | 1.8 | 3.1 |
Usage Example/Method
Lift the handle to disengage the teeth from the locking element.
Turn the lifted handle to a desired position.
When the handle is released, the return spring automatically engages the teeth again for further tightening.
(When the number of teeth is 16, the teeth engage with the locking element every= 22.5° (22.5° = 360°/16).)
Material
- Handle: zinc diecast (ZDC1), Coating: black, orange, silver, red
- Screw part: SUM22L, black oxide coating