Cast iron take-up unit UCT
Brand :
FYH
Caution
- Ball bearing unit moves slightly due to self-aligning function.
- The fit between the main body and the bearing is set slightly tight. If the bearing is skewed upon delivery, insert the shaft, etc. into the bearing and adjust the inclination.
Product Description
· The UCT is a unit that combines a housing fitted with a slide groove.
·By moving the housing along the slide groove in a radial direction, the support position of the shaft center can be adjusted.
Drawing
Specifications Table
(Note)
1. For unit nominal numbers and nominal numbers of units with cover, a fitting symbol is added after the inner diameter number.
2. The following are the nominal numbers of compatible grease fittings.
· B-1/4-28UNF: 201–210, X05–X09, 305–308
· B-R1/8: 211–217, X10–X17, 309–328
3. For triple-seal products (double-seal for 201–205), add the accessory symbol L3 (or L2) after the unit nominal number and bearing nominal number.
4. For the dimensions and shapes of applicable bearings, please refer to the bearing dimension table.
Selection Support Information
Nominal number
