Auto Rotation Tightener (TC-RE)
Brand :
IMAO
Caution
Product Description
Absorbs shock or vibration with high elasticity. Strong against dirt and highly resistant to water and sunlight.
Drawing
Product Specification
- Main body: FCD400 (TC-RE10:SMF4040) hammer tone coating gray
- Arm: SS400 hammer tone coating gray
- Elastic body: Natural Rubber
| Part number | Maximum Tension Load (N) | Weight (g) | Tightening torque (N⋅m) | |
|---|---|---|---|---|
| Arm R1 | Arm R | |||
| TC-RE10 | 113 | 85 | 280 | 10 |
| TC-RE20 | 170 | 136 | 480 | 25 |
| TC-RE30 | 425 | 340 | 730 | 49 |
| TC-RE40 | 1,027 | 790 | 2,000 | 89 |
Specifications Table
Note: d1 is the material dimension and has a cast surface taper shape.
Usage Example
Mounting Method
Adjust the rotation angle with reference to the angle indicator. When fixing the main body, using a matching pin at one location in the cutout section stabilizes the main body and makes mounting easier.
Rotate the main body to the required angle using wrench A. In that state, fix the main body with a bolt using wrench B.
Usage Examples
- Be sure to use the idler on the loose side.
- For both forward and reverse rotation, use the idler on both sides.
Technical Information & Design Ideas
Technical Information
Operating Temperature: -40 to +80°C
Cautions and Prohibitions
Precautions for use
Use the idler on the inside of the arm.
If you use it on the outside, position it as close to the arm as possible, and use it at no more than half the maximum tension (within a rotation angle of ±15°).