Pull-in clamp (QLPD) right swiveling direction
Caution
Product Description
With the rotation of lever, clamp pin and clamp bolt draw in, clamping the workpiece. Both levered and non-lever types available. This series CAD data is being revised. These revisions will be completed soon.
Drawing
Note 1. The clamping height refers to the specified pin length (workpiece thickness) when using a clamping pin (QLPD-X).
Product Specification
- Eliminates the hassle of bolt tightening
- Main body: SCM440, hardening and tempering, black oxide coating
- Lever: S45C, black oxide coating
- Grip ball: ABS resin, black
| Part number | Clamping force (kN) | Clamping mechanism | Recommended workpiece thickness tolerance Note 2) |
|---|---|---|---|
| QLPD150 | 0.9 | Spiral cam Cam angle 4° | +/- 0.3 |
| QLPD200 | 2.5 | +/- 0.5 |
| Part number | Turning direction | R | D2 | Lever Load (N) Note 3) | Weight (g) | |
|---|---|---|---|---|---|---|
| QLPD150R | With Lever | Right | 76.5 | 20 | 150 | 245 |
| QLPD200R | 111.5 | 25 | 200 | 470 | ||
| QLPD150NR | Without Lever | - | - | - | 220 | |
| QLPD200NR | - | - | - | 420 | ||
Note 2) When using a clamping pin, the position of the lever during clamping may vary depending on fluctuations in the workpiece, so please use it within the recommended workpiece thickness tolerance.
Note 3) This is the allowable load that can be applied to the lever.
*Clamping pin is not included with this product.
Specifications Table
| Part number | S | d (g6) | d1 (f7) | H2 | D1 | H (+/- 0.01) | D | θ | Dp | M | M1 | H1 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| QLPD150 | 1.5 | 8 | 5 | 10 | 13.5 | 32 | 40 | 90° | 18 | M4 x 0.7, Depth 8 | M5 × 0.8 | 24.5 |
| QLPD200 | 2 | 12 | 8 | 13 | 18 | 40 | 50 | 110° | 25 | M6 x 1, Depth 9 | M6 × 1 | 30.7 |
Usage Example
Usage Examples
■ Workpiece positioning method
1. Basic usage method
2. When also used for workpiece positioning
· Positioning accuracy ±0.08