Indicator & Scale Digital Position Indicator (SDP-02)
Caution
- Some of the items are scheduled to be discontinued as of end of March in 2023. The manufacturer keep the items produced but they are not available with Misumi.
There are not the replacement items and the plan to resumption of sale. Please check the quotation and order screen for details.
Product Description
The shaft hole diameter is 10 mm. A small, lightweight indicator. The digital display reduces errors caused by incorrect reading. Compatible with all kinds of feed screw pitches. *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
Drawing
Note: The tip of the torque pin is flat, so it cannot be used as a positioning mark.
Product Specification
| Housing |
|---|
| Polyamide (6 nylon) Orange |
Specifications Table
Usage Example
1 Attach the rubber cushion (adhesive seal) to the back side.
2 Perform hole drilling for the torque pin 18 mm above the center of the shaft.
3 Insert it onto the shaft and fix it with the hex socket head set screw.
Product Feature Details
· Lightweight and ultra compact.
· The shaft hole diameter is 10 mm.
· Character height 4 mm.
Selection Support Information
Selection Support Information
Display Example
Technical Information & Design Ideas
Operating Temperature: max. 80°C
Cautions and Prohibitions
· At start, keep the allowable rotational speed at 1/3 or less.
· Avoid using rapid acceleration or rapid stop.
· Do not use when shafts move to the thrust (shaft) direction.