Groove type built-in amplifier photoelectric sensor E3Z-G
Brand :
OMRON
Caution
Product Description
A groove type photoelectric sensor that is easy to install.
[Features]
· A groove type sensor with a groove width of 25 mm.
· One and two optical axis types are available.
· M8 connector in-line type is available.
Drawing
E3Z-G61/E3Z-G62
*Located on the opposite side.
Note: E3Z-G61: 1 optical axis type (S1)
E3Z-G62: 2 optical axis type (S1, S2)
- Output of S1: Black
- Output of S2: White
Product Specification
Rating / Performance
| Items | Type | |||
|---|---|---|---|---|
| NPN output | Model E3Z-G61 / Model E3Z-G61-M3J | Model E3Z-G62 / Model E3Z-G62-M3J | ||
| PNP output | Model E3Z-G81 / Model E3Z-G81-M3J | Model E3Z-G82 / Model E3Z-G82-M3J | ||
| Numbers of Optical Axis | 1 optical axis | 2 optical axis | ||
| Sensing distance (groove width) | 25 mm | |||
| Standard detected object | ⌀1.5 mm or larger opaque object | |||
| Light source (emission wavelength) | Infrared emitting diode (940 nm) | |||
| Power supply voltage | 12 to 24 V DC +/- 10%, ripple (p-p) 10% or less | |||
| Current Consumption | 25 mA or less | 40 mA or less | ||
| Control output | Load power supply voltage 26.4 V DC or less, Load current 100 mA or less (Residual voltage 1 V or less) Open collector output type (varies depending on NPN/PNP output format) Light-ON/Dark-ON switch selectable | |||
| Protection circuit | Power supply reverse connection protection, Output short circuit protection, Mutual interference prevention function | |||
| Response time | Operation and recovery: 1 ms or less each | |||
| Operating ambient illuminance | Light-receiving surface illuminance, incandescent lamp: 3,000 lx or less, sunlight: 10,000 lx or less | |||
| Ambient temperature range | During operation: -25 to +55°C, when stored: -40 to +70°C (no freezing or condensation) | |||
| Ambient humidity range | During operation: 35 to 85% RH, when stored: 35 to 95%RH (no condensation) | |||
| Insulation resistance | 20 MΩ or more (500 V DC insulation resistance tester) between all leads and the case | |||
| Withstand voltage | 1,000 V AC 50/60 Hz for 1 min between batch of leads and the case | |||
| Vibration (endurance) | 10 to 55 Hz, 1.5 mm double amplitude, 2 hr in each direction of X, Y, and Z | |||
| Shock (endurance) | 500 m/s2 in Each X, Y, Z Direction 3 times | |||
| Protective Structure | IEC standard IP64 | |||
| Connection method | Pre-wired type (standard cord length: 2 m, 500 mm) / inline connector type (standard cord length: 300 mm) | |||
| Indicator Light | operation indicator light (orange) | |||
| Weight (packed state) | Pre-wired type 2 m | Approximately 65 g | ||
| Inline connector type | Approx. 30 g | |||
| Material | Case | ABS | ||
| Accessory | Instruction manual | |||