Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67]

Brand :

OMRON

Caution

Product Description

Groove Type Connector / Pre-Wired Type Photomicrosensor (Non-Modulated Light) [EE-SX97/47/67]
Photomicrosensors is a type of optical sensor that detect the presence or absence of an object. They offer a wide variety of shape to choose from.
[Feature]
● Shape : Standard, L type, T type, F type, R type and so on
● Detection Distance (mm.): 5
● Sensing modess : NPN Output and PNP Output
● Sensing method :Through beam
[Application]
Photomicrosensors are a versatile type of sensor that can be used to measure speed, count objects, and more.

Drawing

EE-SX670/670P
EE-SX670A/670R
EE-SX470

Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], drawing 2

EE-SX671/671P
EE-SX671A/671R
EE-SX471

Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], drawing 3

EE-SX672/672P
EE-SX672A/672R

Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], drawing 4

EE-SX673/673P
EE-SX673A/673R
EE-SX473

Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], drawing 5

EE-SX674/674P
EE-SX674A/674R
EE-SX474

Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], drawing 6

EE-SX675/675P

Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], drawing 7

EE-SX676/676P

Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], drawing 8

EE-SX677/677P

Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], drawing 9

EE-SX670-WR/670P-WR

Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], drawing 10

EE-SX671-WR/671P-WR

Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], drawing 11

EE-SX672-WR/672P-WR

Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], drawing 12

EE-SX673-WR

Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], drawing 13

EE-SX674-WR/674P-WR

Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], drawing 14

EE-SX675-WR

Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], drawing 15

EE-SX676-WR

Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], drawing 16

EE-SX677-WR

Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], drawing 17

EE-SX970-C1

Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], drawing 18

EE-SX971-C1

Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], drawing 19

EE-SX972P-C1

Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], drawing 20

EE-SX974P-C1

Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], drawing 21

EE-SX975-C1
EE-SX975P-C1

Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], drawing 22

EE-SX976-C1
EE-SX976P-C1

EE-SX977-C1

Product Specification

Low profile connector/pre-wired type (Direct Current light)*1
EE-SX47/67

50 to 100 mA direct switching, global standard groove type

There is a type that switches the operating mode between Dark-ON and Light-ON.
High-speed response with a response frequency of 1 kHz
Easy operation check with bright light indicator for light entrance
Wide range of power supply voltage from 5 to 24 V DC
A type in which the light indicator lights up when the light is blocked is available.
Available in 8 shapes for a wide range of variations
Robot cord with excellent flexibility is adopted as standard *2

* 1. The pre-wired type is model EE-SX67 series only.
*2. Pre-wired type only

Connector type

*3. Open the (L) terminal of the connector, then it becomes Dark-ON when the light is blocked, and short-circuit the (L) and (+) terminals, then it becomes Light-ON when the light enters. Do not short the L terminal to 0 V, setting to Dark-ON when the light is blocked. It is convenient to use the connector type EE-1001-1, setting to Light-ON when the light enters. The (L) and (+) terminals of this connector are already short-circuited.
* 4. When using the EE-1006 and EE-1010 series connectors with cords, if the (L) terminal ((2) pink) wire is not used, it may be affected by noise. Therefore, cut the unused (L) terminal wire from the base of the connector and wrap it with insulation tape, etc., so that it does not come in contact with other terminals.

Pre-Wired Type

*1. Open the (L) terminal, then the light turns on in Dark-ON mode, and short-circuit the (L) and (+) terminals, then the light turns on in Light-ON mode. Do not short the L terminal to 0 V, setting to Dark-ON when the light is blocked.
* 2. When using the EE-1006 and EE-1010 series connectors with cords, if the (L) terminal ((2) pink) wire is not used, it may be affected by noise. Therefore, cut the unused (L) terminal wire from the base of the connector and wrap it with insulation tape, etc., so that it does not come in contact with other terminals.

Rating / Performance

Items	Type		Standard type	L-shaped	T-groove center 7 mm	Close contact mounting type		T-groove center 10 mm	F-shaped	R-shaped
	NPN	Connector type	EE-SX670 EE-SX670A EE-SX470	EE-SX671 EE-SX671A EE-SX471	EE-SX672 EE-SX672A	EE-SX673 EE-SX673A EE-SX473	EE-SX674 EE-SX674A EE-SX474	EE-SX675	EE-SX676	EE-SX677
	NPN	Pre-Wired Type	EE-SX670-WR	EE-SX671-WR	EE-SX672-WR	EE-SX673-WR	EE-SX674-WR	EE-SX675-WR	EE-SX676-WR	EE-SX677-WR
	PNP	Connector type	EE-SX670P EE-SX670R	EE-SX671P EE-SX671R	EE-SX672P EE-SX672R	EE-SX673P EE-SX673R	EE-SX674P EE-SX674R	EE-SX675P	EE-SX676P	EE-SX677P
	PNP	Pre-Wired Type	EE-SX670P-WR	EE-SX671P-WR	EE-SX672P-WR	-	EE-SX674P-WR	-	-	-
Sensing Distance			5 mm (groove width)
Standard detected object			Opaque object: 2 x 0.8 mm or more
Hysteresis			0.025 mm or less
Light source (peak emission wavelength)			Infrared emitting diode (940 nm)
Indicator light *1			Lights when light enters (red) (A and R types light when light is blocked)
Power supply voltage			5 to 24 V DC +/- 10%, ripple (p-p) 10% or less
Current Consumption			12 mA or less (connector type, when L terminal opens), 35 mA or less (NPN pre-wired type), 30 mA or less (PNP pre-wired type)
Control output			NPN type: NPN open collector, output 5 to 24 V DC 100 mA or less Residual voltage 0.8 V or less (at load current of 100 mA), residual voltage 0.4 V or less (at load current of 40 mA), OFF current (leakage current) 0.5 mA or less PNP type: PNP open collector, output 5 to 24 V DC 50 mA or less Residual voltage 1.3 V or less (at load current of 50 mA), OFF current (leakage current) 0.5 mA or less
Protection circuit			Load short-circuit protection (connector type), N/A (pre-wired type)
Response frequency *2			1 kHz or more (Average value is 3 kHz)
Operating ambient illuminance			Light-receiving surface illuminance, fluorescent lamp: 1,000 lx or less
Ambient temperature range			During operation: -25 to +55℃, when stored: -30 to +80℃ (no freezing or condensation)
Ambient humidity range			During operation: 5 to 85% RH, when stored: 5 to 95%RH (no freezing or condensation)
Vibration (endurance)			20 to 2,000 Hz (peak acceleration 100 m/s²), 1.5 mm double amplitude, 2 hr in each direction of X, Y, and Z (4 min cycle)
Shock (endurance)			500 m/s², 3 times in each direction of X, Y, and Z
Protective Structure			IP50, IEC60529 standard
Connection method			Connector type (directly solderable), pre-wired type (standard cord length 1 m), inline connector type (standard cord length 0.1 m)
Weight (packed state)		Connector type	Approximately 3.1 g	approximately 3 g	Approximately 2.4 g	Approximately 2.3 g	approximately 3 g	Approximately 2.7 g	Approximately 2.2 g	Approximately 2.2 g
Weight (packed state)		Pre-Wired Type	Approximately 18.9 g	Approximately 17.3 g	Approximately 17.8 g	Approximately 16.8 g	Approximately 17.1 g	Approximately 18.3 g	Approximately 16.9 g	Approximately 16.9 g
Material	Case		Polybutylene terephthalate (PBT)
Material	Cover emitter/receiver		polycarbonate

* 1. GaP red LED (peak emission wavelength 690 nm)
* 2. The measured response frequency indicates the value when the disk shown in the right figure is rotated.

Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], product specification 3

Low profile connector type (Direct Current Light)
EE-SX97

Built-in connector for compact size and easy connection, and built-in protection circuit for peace of mind

Built-in connector minimizes the external shape and occupied dimensions
Equipped with 2 outputs, Light-ON / Dark-ON
Built-in reverse connection protection circuit for peace of mind
Output overcurrent protection by thermal shutdown circuit *1
The indicator light can be checked from multiple directions, and accommodate any installation location.
Has a connector with a lock that can also be used with commercially available connectors *2

*1. Output overcurrent protection is only for NPN type OUT2
*2. Recommended connection connector
Made by J.S.T. MFG. CO., LTD., contact: SPHD-001T-P0.5, housing: PAP-04V-S

Features

Built-in connector type for miniaturization and easy connection

With the built-in connector, the external shape and occupied dimensions are greatly reduced. Furthermore, the use of commercially available general-purpose connectors reduces wiring costs.

Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], product specification 4

Previous product / EE-SX97 series

Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], product specification 5

Uses a commercially available general-purpose connector for easy connection, and comes with a positive lock for removal prevention.

Peace of mind with built-in reverse connection protection circuit
Built-in reverse connection protection function protects against reverse power supply connection and reverse output connection. Customers at assembly sites can use it with confidence.

Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], product specification 6

NPN type example

Easy-to-see indicator light
The indicator light can be checked from multiple directions (up to 4 directions), and accommodate any installation location.

Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], product specification 7

Built-in thermal shutdown circuit
The NPN output type OUT2 control output has an output overcurrent protection function with a thermal shutdown circuit.

Equipped with 2 outputs: Light-ON / Dark-ON
All models are equipped with 2 outputs, Light-ON / Dark-ON, so output can be switched simply by wiring according to usage conditions.

Main body

Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], product specification 8

Rating / Performance

Items	Type	Standard type	L-shaped	T-groove center 7 mm	Close contact mounting type	T-groove center 10 mm	F-shaped	R-shaped
	NPN	EE-SX970-C1	EE-SX971-C1	-	-	EE-SX975-C1	EE-SX976-C1	EE-SX977-C1
	PNP	-	-	EE-SX972P-C1	EE-SX974P-C1	EE-SX975P-C1	EE-SX976P-C1	-
Sensing Distance		5 mm (groove width)
Standard detected object		Opaque object: 2 x 0.8 mm or more
Hysteresis		0.025 mm or less *1
Light source (peak emission wavelength)		Infrared emitting diode (940 nm)
Indicator light		Lights up when light is received (orange LED)
Power supply voltage		5 to 24 V DC +/- 10%, ripple (p-p) 10% or less
Current Consumption		21 mA or less
Control output		Load power supply voltage: DC5 to 24 V Load current: 50 mA or less Off current: 0.5 mA or less Residual voltage: 1.0 V or less (at load current of 50 mA) 0.4 V or less (at load current of 5 mA)
Protection circuit		Reverse power supply connection protection, reverse output connection protection, output overcurrent protection (Only NPN type OUT2 works)
Response frequency		1 kHz or more (average value is 3 kHz)*2
Operating ambient illuminance		Light-receiving surface illuminance, fluorescent lamp: 1,000 lx or less
Ambient temperature range		During operation: -25 to +55℃, when stored: -30 to +80℃ (no freezing or condensation)
Ambient humidity range		During operation: 5 to 85% RH, when stored: 5 to 95%RH (no freezing or condensation)
Vibration (endurance)		10 to 2,000 Hz, 0.75 mm single amplitude, each direction of X, Y, and Z, sweep time: 15 min, sweep count: 10 times
Shock (endurance)		500 m/s², 3 times in each direction of X, Y, and Z
Protective Structure		IEC60529 standard, IP50
Connection method		Connector type
Weight (packed state)		approximately 3 g
Material	Case/cover	Polybutylene terephthalate (PBT)
Material	Emitter and Receiver	Polycarbonate (PC)

* 1. Value when the detected object is moved in a lateral direction of the slot.
* 2. The measured response frequency indicates the value when the disk shown in the right figure is rotated.

Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], product specification 9

Cautions and Prohibitions

This product cannot be used for the purpose of detecting the human body, either directly or indirectly, to ensure safety.
Do not use this product as a detection device for human body protection.

Safety Precautions

Operating environment

The protective structure of this sensor is IP50 (compliant with IEC60529), and it is not waterproof or dust-proof.
Do not use in applications where liquids such as water or oil adhere to the main body.

Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67]

Caution

Product Description

Drawing

Product Specification

Low profile connector/pre-wired type (Direct Current light)*1EE-SX47/67

Rating / Performance

Low profile connector type (Direct Current Light)EE-SX97

Features

Rating / Performance

Cautions and Prohibitions

Cautions and Prohibitions

Safety Precautions

Precauti

Low profile connector/pre-wired type (Direct Current light)*1
EE-SX47/67

Low profile connector type (Direct Current Light)
EE-SX97