Cam Side Clamp (QLSCH)
Caution
Product Description
2 types available: constant light-load clamping force type, and adjustable force standard type
[Features]
· Heavy load type has internal screw for constant clamp force.
· Standard type has lever to adjust clamping force for load.
· Mouth ring head is polished finish, so can be clamped on workpiece finished surface.
· When clamping mouth ring exerts downward force preventing workpiece float.
Horizontal Push Clamp Significantly Reduces Setup Time With Tool-Free Single-Action Operation
QLSCH-L / Light Load Type
QLSCH / Standard Type
| Type | Main Body | Jaw, Shaft | Cam Lever, Lever |
|---|---|---|---|
| QLSCH-L | S45C Black oxide coating | S45C Hardening Black oxide coating Polishing finishing | SCM440 Hardening Electroless nickel plating |
| QLSCH | SCM440 Hardening Black oxide coating |
Cam Side Clamp (QLSCH) Outline Drawing And Specifications
Dimensional drawing of Cam Side Clamp (light load type)
Dimensional drawing of standard type
See front view (standard type) QLSCH
See side view (standard type) QLSCH
| Type | W1 | W2 | H1 | H2 | M | P1 | H4 | L4 | W | L3 | H5 | d | L5 | P |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| QLSCH32 | 45 | 15 | 27 | 18 | M4 × 0.7, depth: 6 | 30 | 18 | 13 | 75 | 20 | 8 | 6.6 | 3 | 60 |
| QLSCH40 | 60 | 20 | 33 | 22 | M5 × 0.8, depth: 8 | 40 | 22 | 17 | 100 | 26 | 10 | 8.6 | 4 | 80 |
| Type | H | L | L2 | R | L1 | H3 | M1 |
|---|---|---|---|---|---|---|---|
| QLSCH32 | 32 | 51 | 48 | 63 | 51.5 | 18 | M4 × 0.7-5L |
| QLSCH40 | 40 | 67 | 63 | 80 | 67 | 22 | M5 × 0.8-6L |
| Part Number | A | Clamp Stroke - Note 1) | Fast Feed Stroke | Lever Load (N) Note 2) | Clamping Force (kN) | Weight (g) |
|---|---|---|---|---|---|---|
| QLSCH32L | 14 | 0.3 | 0.8 | 40 | 0.6 | 600 |
| QLSCH40L | 18 | 0.4 | 50 | 1.2 | 1,320 |
- *Make sure the workpiece variation is within 0.1 mm
- *The load when the lever is brought down to the clamping position
| Part Number | A | Clamp Stroke | Cam Lever (See P. 198) | Lever Load (N) - Note 3) | Clamping Force (kN) | Weight (g) |
|---|---|---|---|---|---|---|
| QLSCH32 | 19 | 1.6 | QLCA-06 | 150 | 2 | 620 |
| QLSCH40 | 24 | 2.2 | QLCA-08 | 200 | 3 | 1,360 |
- *Allowable load that can be hung on the lever
Features Of This Product
Image of tip of jaw
- This cam lever type clamp is able to quickly clamp with a single action.
- The light load type always maintains a constant clamping force thanks to its built-in spring.
- The standard type has a lever to adjust the clamping force to the load.
- The polished finish at the tip of the jaw allows clamping of finished surfaces.
- When clamping, the force from the jaw works in a downwards direction, preventing the workpiece from lifting off the table.
Usage Examples For This Product
Standard Type
When the cam lever is turned, the jaw performs a stroke and clamps the workpiece. Refer to the capability chart for the clamping force.
Light Load Type
Turn the lever to the clamping position to clamp the workpiece. A constant clamping force is maintained.
Changing the lever position
The lever's direction can be modified up, down, left or right (by 90°) using the stop screw with hex socket head.
How To Mount This Product
When mounting the light load type, follow the procedure below to obtain a constant clamping force within the clamp stroke.
1. Set the lever to the clamp start position.
2. Apply the jaw to the workpiece.
3. Use the bolt with hex socket head to secure the main body. Turn the lever to the clamping position to clamp the workpiece.