Thread Section Anti-Shaking Adjuster for Anchor Fixing D-J-EII/AT Series
Caution
Product Description
An adjuster for anchor fixing in which the horizontal shaking of the screw shaft part is completely locked. Note: Please be advised that the model number in VONA has been changed from "D-J-E II" to "D-J-E2."
[Features]
· The structure is such that some space exists between the receiver and bolt.
· This is the result of our efforts to enable bolts to move smoothly even if the floor surface is somewhat tilted.
· It has been pointed out in the past that this may cause bolt looseness to occur when the upper portion of a conveyor vibrates, possibly resulting in significant machinery movement caused by shaking when the conveyor stops.
· It is for this reason that we came up with the D-J type, which is suitable for use when the top portion of machinery such as a conveyor vibrates and moves slightly.
· Even when a running machine is stopped, the bolts will not move and falling over will not occur.
Drawing
Product Specification
| - | Trivalent chromate coated product | All stainless steel product |
|---|---|---|
| Load capacity | 500 kgf | 500 kgf |
| Material | Bolt and nut: SS400 equivalent Base: SS rolled steel plate (2 tons) | Bolt and nut: Equivalent to SUS304 Base: SUS304 steel plate (2 tons) |
| Surface treatment | Trivalent Chromate | Passivation |
Structure
(1) It has a structure where a screw is cut between the base and the tip of the hex part of the bolt to allow the nut to move up and down.
(2) As with the D-A type, the connection between the base and the bolt is crimped after the nut is screwed in, but the nut is further crimped after stripping the thread at the tip of the bolt.
Specifications Table
| Part number | Dimensions (mm) | Weight (g) | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Trivalent chromate coated product | All stainless steel product | D | L1 | L2 | H1 | H2 | I | B | |
| D-J-E2 12X50 | - | M12 × 1.75 | 50 | 82 | 8 | 7 | 17 | 19 | 220 |
| D-J-E2 12X100 | D-J-E2 12X100SUS | M12 × 1.75 | 100 | 132 | 8 | 7 | 17 | 19 | 250 |
| D-J-E2 12X120 | D-J-E2 12X120SUS | M12 × 1.75 | 120 | 152 | 8 | 7 | 17 | 19 | 260 |
| D-J-E2 12X150 | - | M12 × 1.75 | 150 | 182 | 8 | 7 | 17 | 19 | 280 |
| D-J-E2 16X130 | - | M16 × 2.0 | 130 | 167 | 10 | 10 | 17 | 24 | 410 |
| AT-12-50 | - | M12 × 1.75 | 50 | 82 | 8 | 7 | 17 | 19 | 220 |
| AT-12-100 | AT-12-100S | M12 × 1.75 | 100 | 132 | 8 | 7 | 17 | 19 | 250 |
| AT-12-120 | AT-12-120S | M12 × 1.75 | 120 | 152 | 8 | 7 | 17 | 19 | 260 |
| AT-12-150 | AT-12-150S | M12 × 1.75 | 150 | 182 | 8 | 7 | 17 | 19 | 280 |
| AT-16-65 | - | M16 × 2.0 | 65 | 102 | 10 | 10 | 17 | 24 | 330 |
| AT-16-100 | AT-16-100S | M16 × 2.0 | 100 | 137 | 10 | 10 | 17 | 24 | 370 |
| AT-16-130 | AT-16-130S | M16 × 2.0 | 130 | 167 | 10 | 10 | 17 | 24 | 410 |
| AT-16-150 | AT-16-150S | M16 × 2.0 | 150 | 187 | 10 | 10 | 17 | 24 | 430 |
| AT-16-180 | AT-16-180S | M16 × 2.0 | 180 | 217 | 10 | 10 | 17 | 24 | 470 |
| AT-16-200 | - | M16 × 2.0 | 200 | 237 | 10 | 10 | 17 | 24 | 500 |