Mega Touch Tube MTP Polyurethane Tube
Caution
- The product images are representative only. Specifications may differ for each part number, including shape and color.
Product Description
A polyurethane tube with a wide inner diameter and a large flow rate.
[Features]
・ Air leaks are hard to occur and tubes can be attached and removed smoothly
・ Can be used for air and industrial water piping
・ It has excellent flexibility and the minimum bending radius of the tube is smaller than other tubes, so it can be used for piping in narrow places
・ Prints cut marks at 1-m intervals, ideal for cutting work and inventory management
・ Excellent oil resistance
・ Excellent outer diameter accuracy
[Application]
・ Most suitable for industrial water piping, air piping in general (equipment piping, equipment piping, air tools, etc.)
Product Specifications
Product Specifications
| Operating fluid | Compressed Air | Industrial water | Vacuum |
|---|---|---|---|
| Operating temperature range | -5 to +60°C | 5 to 40°C | -5 to +60°C |
| Burst Pressure | 4 MPa | ||
| Maximum Operating Pressure | 1 MPa | 0.3 MPa | -100 kPa |
| The industrial water pressure takes into account the use of a water hammer | |||
| Compatible fitting | Touch Connector Five, Touch Connector mini, Touch Connector FUJI, Touch Connector, Sleeve Connector | ||
- *The above pressure values were measured at room temperature (20°C). Please select a fitting that is compatible with industrial water if such water is in use.
Burst pressure correction coefficient by temperature
Normal operating pressure (MPa) = Burst pressure × Correction coefficient × 1/4
Product comparison information
Tube flow rate comparison table
Standard table
| Part number Model | Outer diameter × inner diameter O.D. × I.D. (mm) | Minimum Bending Radius Min. turning radius (mm) | Outer diameter accuracy Tolerance (mm) | Weight Weight (kg/m) | Color Color |
|---|---|---|---|---|---|
| MTP-4 | 4 × 2.5 | 8 | ±0.1 | 0.010 | BK W Y R G LB C LG |
| MTP-6 | 6 × 4.5 | 15 | 0.015 | ||
| MTP-8 | 8 × 6 | 24 | 0.028 | ||
| MTP-10 | 10 × 7.5 | 30 | +0.1 -0.15 | 0.042 | |
| MTP-12 | 12 × 9 | 36 | 0.062 |
- * BK (black), W (white), Y (yellow), R (red), G (green), LB (blue), C (transparent), LG (light green)
Product features details
Features
- 1. Large flow rate and high pressure.
The inner diameter is larger than that of urethane tubes with the same outer diameter except 4 mm in diameter, and the burst pressure (operating pressure) is approx. 1.3 times the current model. - 2. Excellent oil resistance.
Ideal for air piping in factories. - 3. Excellent outer diameter accuracy.
Outer diameter accuracy can be found in the model table. - 4. Laser marked cut marks, model information, etc.
Cut marks are printed at 1 m intervals, which is ideal for cutting work and inventory control.
Performance graph