Eye Bolt, Long Shank

Brand :

SUNCO

Caution

Please note that if the mating part is to be prepared by the customer, it will not fit unless it is over-tapped according to the standard.
Since hot-dip galvanizing results in a very thick coating, please select a product with the same surface treatment for the mating component.
The product images are representative only. Specifications may vary by part number, including shape and color.

Product Description

The neck of the ring is longer than standard products, so it is used in recessed areas or where a protrusion is required.

Drawing

Specifications Table

unit: mm

Nominal thread size d		a		b		C		D		t		h		H (Reference value)		Operating load KN (reference value)
Coarse	Pitch	Steel	SUS	Steel	SUS	Steel	SUS	Steel	SUS	Steel	SUS	Steel	SUS	Steel	SUS	Operating load KN (reference value)
M6	1.0	26		16		5		13	13.5	4.9	6	13.5	14	26.5	27	0.588
M8	1.25	32.6		20		6.3		16		5		17		33.3		0.785
M10	1.5	41		25		8		20		7		21		41.5		1.47
M12	1.75	50		30		10		25		9		26		51		2.16
M16	2.0	60		35		12.5		30		11		30		60		4.41
M20	2.5	72		40		16		35		13		35		71		6.18
M22 (Base material / no plating)	2.5	81	80	45	44	18	19	40	40	15	16.5	40	43	80.5	84	7.74
M22 (with plating)	2.5	90	-	49.2	-	20.2	-	45	-	18.5	-	46	-	91	-	7.74
M24	3.0	90		50		20		45		18		45		90		9.32
M30	3.5	110		60		25		60		22		55		110		14.7
M36	4.0	133		70		31.5		70		26		65		131.5		22.6

Due to the posture or swaying of the product during lifting or moving, the load may not be evenly distributed across all bolts. Therefore, regardless of the number used simultaneously, the load specified in the table applies.