General-purpose Basic Switch Z
Caution
Product Description
A best-selling basic switch featuring high accuracy and a wide variety of types.
[Features]
· With a large breaking capacity of 15 A and high accuracy (excellent repeatability)
· This is the basic type of micro switch, and a wide variety is available to suit different applications, including standard, split contact, and maintained contact types
· The standard type also includes a series for micro-load applications
· A lineup that includes drip-proof terminal protective covers, which safely protect the terminal and provide drip-proof performance, as well as molded terminal types
Dimensional Drawing of OMRON Micro Switches
OMRON Micro Switches type
* Stainless steel Micro Switches
*For information on model numbers other than those listed above, please refer to the digital catalog.
Specification Table of OMRON Micro Switches
OMRON Micro Switches Performance
| Micro Switches item | Classification | |||||
|---|---|---|---|---|---|---|
| Model Z-15 (for microloads, excluding flexible rod type) | Model Z-01H | Model Z-15 (flexible rod type) | Model Z-10F | Model Z-15H2 | ||
| Allowable Operating Speed | 0.01mm to 1m/s *1 | 1mm to 1m/s | 0.1mm to 1m/s *1 | 0.01mm to 1m/s | ||
| Allowable operating frequency | Mechanical | 240 times/min | 120 times/min | 240 times/min | 240 times/min | |
| Micro Switches Electrical | 20 times/min | |||||
| Insulation resistance | 100MΩ or more (at DC500V mega) | |||||
| Contact Resistance | 15MΩ or less (initial value) | 50MΩ or less (initial value) | 15MΩ or less (initial value) | 25MΩ or less (initial value) | 15MΩ or less (initial value) | |
| Withstand voltage | Contact spacing G between terminals of the same polarity 1,000V AC 50/60Hz 1min Contact spacing H 600V AC 50/60Hz 1min Contact spacing E 1,500V AC 50/60Hz 1min | Same-polarity terminal contact spacing G AC1,000V 50/60Hz 1min Contact spacing H AC600V 50/60Hz 1min | Spacing between same pole terminals F AC1,500V 50/60Hz 1min | Between same terminals AC600V 50/60Hz 1min | ||
| Between live metal parts and earth, between each terminal and non-live metal parts AC2,000V 50/60Hz 1min | ||||||
| vibration | malfunction | 10 to 55Hz, double amplitude 1.5mm *5 | 10 to 20Hz, double amplitude 1.5mm *5 | 10 to 55Hz, double amplitude 1.5mm *5 | ||
| impact | Durability | Up to 1,000m/s2 | ||||
| malfunction | Maximum 300m/s2* 2 *5 | Maximum 50m/s2* 5 | Maximum 300m/s2* 3 *5 | Maximum 100m/s2 | ||
| Durability | Mechanical | Contact spacing G, H: 20 million times or more*4 Contact spacing E: 300,000 times or more | Over 1 million times | Over 500,000 times*1 | Over 20 million times | |
| Micro Switches Electrical | Contact spacing G, H 500,000 times or more Contact spacing E 100,000 times or more | Over 100,000 times | Over 100,000 times | Over 500,000 times | ||
| Protective structure | General form | IP00 | ||||
| Micro Switches Drip-proof type | Equivalent to IP62 (excluding terminals) | |||||
| Electric shock protection class | Class I | |||||
| PTI (Tracking Characteristics) | 175 | |||||
| Ambient temperature | General form | -25 to +80℃ (but do not freeze) | ||||
| Drip-proof type | -15 to +80℃ (but do not freeze) | |||||
| Ambient humidity | General form | 35 to 85%RH | ||||
| Drip-proof type | 35 to 95% RH | |||||
| mass | Approximately 22 to 58 g | Approximately 42-48g | Approximately 34 to 61 g | Approx. 22g | ||
*1. For Micro Switches type. (For lever type, the value is for the Micro Switches part.)
*2. For Z-15G Micro Switches type.
*3. Value is for Z-10FY-B type.
*4. For Micro Switches type. For types other than Micro Switches, the value is 10 million times or more.
*5. Malfunction within 1 ms
Specification of OMRON Micro Switches
OMRON Micro Switches Structure
Micro Switches Drip-proof type
- No drip-proof terminal protection cover
- With waterproof terminal protection cover
Standard form
Note: For the reverse action type (Z-15GM type), the NO and NC terminal arrangement is reversed.
( ) indicates lead wire
color Note : For the reverse action type (Z-15GM type), the NO and NC terminal arrangement is reversed.
Note: For the reverse action type (Z-10FM type), the NO and NC terminal arrangement is reversed.
OMRON Micro Switches Format Composition
Standard form
General form
- We have a wide range of actuators to suit your needs, allowing you to choose the one that best suits your application.
- The contact mechanism for Micro Switches is a crossbar type, and since a gold alloy is used for the contacts, it exhibits extremely high contact reliability in the microload range.
- Contact spacing is available in H2: 0.20mm (ultra-high sensitivity), H: 0.25mm (high sensitivity, for Micro Switches), G: 0.5mm (standard), E: 1.8mm (high capacity).
Micro Switches Drip-proof type
- This Micro Switches has rubber pushers attached to the actuator and adhesive is filled between the case and cover to improve water resistance.
- We also offer a waterproof terminal with a protective cover and a molded terminal with the terminal part hardened in resin.
Split contact type
- Based on the mechanism of a general-purpose basic Micro Switches, the movable and fixed contacts are divided into two, providing two sets of simultaneous contacts.
- Since the movable contact side is common (COM), it can be used in series or parallel depending on the connection method.
- When used as a twin contact, high reliability is achieved in Micro Switches range.
Maintained Contact Type
- In addition to the Micro Switches, there is a reset button on the bottom of the case opposite the push button. Please operate this button alternately.
- Generally, the "movement until reset" is greater than the "movement before operation," and they are suitable for use in circuits that must not automatically reset, such as reversible control circuits and manual reset operation circuits.
Model designation method of OMRON Micro Switches
OMRON Micro Switches Format Standards
Standard form
15:15A
H: 0.25mm (high sensitivity, for small loads)
G: 0.5mm (standard)
E: 1.8mm (high capacity)
(3) Actuator type
S: Thin spring push button type
D: Short spring push button type
K: Spring push button type (medium option)
K3: Spring push button type (large option)
Q3: Panel mounting push button type (small option)
Q: Panel mounting push button type (medium option)
Q8: Panel mounting Micro Switches type (large option)
Q22: Panel mounting roller push button type
Q21: Panel mounting cross roller push button type
L2: Roller leaf spring type
W21: Hinge short lever type
W: Hinge lever type (small OF)
W3: Hinge lever type (medium OF)
W32: Hinge lever type (large OF)
W4: Small force hinge lever type
W44: Hinge long lever type
W78: Small force hinge wire lever type (small OF)
W52: Small force hinge wire lever type (large OF)
W22: Hinge roller short lever type
W25: Hinge roller lever type (large roller)
W49: Hinge cross roller short lever type
W54: Hinge cross roller lever type
W2277: One-way action hinge roller short lever type (small OF)
M: Reverse action hinge lever type
M22: Reverse action hinge roller short lever type
M2: Reverse action hinge roller lever type
NJ: Flexible rod type (large OF)
NJS: Flexible rod type (small OF)
55: Drip-proof type (terminals not included)
A55: Drip-proof type (terminals included)
B: Screw terminal (internal tooth washer)
B5V: Screw terminal with drip-proof terminal protection cover
(Only applicable to Z-15G*A55 type, cannot be used with other terminals.)
Micro Switches Standard type (water-proof type (molded terminal type))
(2) Lead wire type
No indication: VSF
19 : VCT
(3) Lead wire lead direction
L: See the figure on the right
R: See the figure on the right
D: See the figure on the right
(4) Lead wire length
1: 1m
3: 3m
10: 10A (split contact type)
(2) Contact spacing
F: 1mm (high capacity)
(3) Actuator type
No indication: Micro Switches type
S: Spring thin push button type
D: Spring short push button type
Q: Panel mounting push button type
Q22: Panel mounting roller push button type
W: Hinge lever type
W22: Hinge roller short lever type
W2: Hinge roller lever type
M22: Reverse action hinge roller short lever type
(4) Structure
Y: Split contact type
(5) Terminal type
B: Screw terminal (internal tooth washer)
15: 15A
(2) Contact spacing
E: 1.8mm (high capacity)
(3) Actuator type
No indication: Micro Switches type
S: Spring thin push button type
W: Hinge lever type
(4) Structure
R: Maintained contact type
Technical Information of OMRON Micro Switches
OMRON Micro Switches Ratings (Standard Type/Split Contact Type/Maintained Contact Type)
Model Z-15 (except for microload and flexible rod models)
| Contact Spacing | Rated voltage(V) | Micro Switches item | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Non-inductive load (A) | Inductive load (A) | ||||||||
| Resistive Load | Lamp Load | Inductive Load | Motor Load | ||||||
| Normally closed | Normally open | Normally closed | Normally open | Normally closed | Normally open | Normally closed | Normally open | ||
| G, H, H2, E | AC 125 250 500* | 15(10)* 15(10)* 10 | 3 2.5 1.5 | 1.5 1.25 0.75 | 15(10)* 15(10)* 6 | 5 3 1.5 | 2.5 1.5 0.75 | ||
| G | DC 8 14 30 125 250 | 15 15 6 0.5 0.25 | 3 3 3 0.5 0.25 | 1.5 1.5 1.5 0.5 0.25 | 15 10 5 0.05 0.03 | 5 5 5 0.05 0.03 | 2.5 2.5 2.5 0.05 0.03 | ||
| H, H2 | DC 8 14 30 125 250 | 15 15 2 0.4 0.2 | 3 3 2 0.4 0.2 | 1.5 1.5 1.4 0.4 0.2 | 15 10 1 0.03 0.02 | 5 5 1 0.03 0.02 | 2.5 2.5 1 0.03 0.02 | ||
| E | DC 8 14 30 125 250 | 15 15 15 0.75 0.3 | 3 3 3 0.75 0.3 | 1.5 1.5 1.5 0.75 0.3 | 15 15 10 0.4 0.2 | 5 5 5 0.4 0.2 | 2.5 2.5 2.5 0.4 0.2 | ||
*The figures in parentheses are the ratings for the Z-15HW52, Z-15HW78(-B), and Z-15H2(-B).
Also, these models are not rated for AC500V.
The AC ratings for this model are 125 and 250V only.
Micro Switches Type Z-15 (flexible rod type)
| Rated voltage(V) | Non-inductive load (A) | Inductive load (A) | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Resistive Load | Lamp Load | Inductive Load | Motor Load | ||||||
| Normally closed | Normally open | Normally closed | Normally open | Normally closed | Normally open | Normally closed | Normally open | ||
| AC 125 250 | 15 15 | twenty one | 1 0.5 | 7 5 | 2.5 1.5 | twenty one | |||
| DC 8 14 30 125 250 | 15 15 2 0.4 0.2 | 2 2 2 0.4 0.2 | 1 1 1 0.4 0.2 | 7 7 1 0.03 0.02 | 3 3 1 0.03 0.02 | 1.5 1.5 0.5 0.03 0.02 | |||
Micro Switches Model Z-10F
| Contact Spacing | Rated voltage(V) | Micro Switches item | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Non-inductive load (A) | Inductive load (A) | ||||||||
| Resistive Load | Lamp Load | Inductive Load | Motor Load | ||||||
| Normally closed | Normally open | Normally closed | Normally open | Normally closed | Normally open | Normally closed | Normally open | ||
| Micro Switches Series connection | AC 125 250 | 10 10 | 4 2.5 | 2 1.5 | 6 6 | 5 3 | 2.5 1.5 | ||
| DC 30 125 250 | 10 1 0.6 | 4 1 0.6 | 2 1 0.6 | 6 0.1 0.05 | 6 0.1 0.05 | 3 0.1 0.05 | |||
| Parallel connection | AC 125 250 | 6 6 | 3 2.5 | 1.5 1.25 | 4 4 | 4 2 | twenty one | ||
| DC 30 125 250 | 6 0.6 0.3 | 4 0.6 0.3 | 2 0.6 0.3 | 4 0.1 0.05 | 6 0.1 0.05 | 3 0.1 0.05 | |||
Micro Switches Model Z-01H
| Rated voltage(V) | Resistive Load (A) | ||
|---|---|---|---|
| Normally closed | Normally open | ||
| AC | 125 | 0.1 | |
| DC | 8 14 30 | 0.1 0.1 0.1 | |
Note 1. The above values indicate steady-state current.
Note 2. An inductive load is one with a power factor of 0.4 or more (AC) and a time constant of 7 ms or less (DC).
Note 3. A lamp load is one with a 10 times inrush current.
Note 4. A motor load is one with a 6 times inrush current.
Note 5. For reverse action hinge lever types, the ratings for normally closed and normally open are reversed.
Note 6. For molded Micro Switches, the AC ratings are 125 and 250V only.
Note 7. The ratings are for tests conducted under the following conditions.
(1) Ambient temperature: 20±2°C
(2) Ambient humidity: 65±5%RH
(3) Operation frequency: 20 times/min.
Please use within the following range.
| Micro Switches Model Z-01H | Micro Switches Model Z-15*, Z-10FY | |
|---|---|---|
| Minimum Applicable Load | DC5V 1mA | DC5V 160mA |
OMRON Micro Switches Contact Specifications
| Micro Switches item | Classification | |||
|---|---|---|---|---|
| Model Z-15 | Model Z-01H | Model Z-10F | ||
| contact | Micro Switches specification | rivet | Single Crossbar | rivet |
| Micro Switches Material | silver | Gold alloy | silver | |
| Inrush current | Normally closed | Maximum 30A | Maximum 0.1A | Maximum 40A |
| Normally open | Maximum 15A | Maximum 0.1A | Maximum 20A | |
OMRON Micro Switches Reference Data
How to Use of OMRON Micro Switches
Mounting Hole Dimensions of OMRON Micro Switches
Use M4 screws for mounting and securely attach using flat washers, spring washers, etc. The tightening torque should be 1.18 to 1.47 N m.
When mounting to a panel, the tightening torque for the actuator's hex nut should be 2.94 to 4.9 N·m.
OMRON Micro Switches
