Actuator used for micro switch plate VAL
Caution
Product Description
Pin push button type and exclusively for the models with OF1/96N or more.
[Features]
· Actuators are supplementary components used when operating the switch using cams or dogs or when transmitting mechanical movements that are not in alignment with the push button of switch.
· The VAL series are suitable for cases where a switch is operated by a rotary cam or sliding devices with relatively low operation frequency.
Dimensional Drawing of OMRON Peripheral Components
* The Peripheral Components Model numbers are for the Actuators only.
The value given for operating characteristics are reference values. For operating characteristics of models not listed above, consult your OMRON sales representative.
Leaf Spring Model of Peripheral Components
VAL
| Operating characteristics | In the case of V-15-1A5 |
|---|---|
| Operating Force OF Max. Releasing Force RF Min. | 2.26 N {230 gf} 0.49 N {50 gf} |
| Overtravel OT Min. Movement Differential MD Max. | 0.8 mm 0.4 mm |
| Free Position FP Max. Operating Position OP | 17 mm 17.9 mm ± 0.5 mm |
Note. Pin plunger (Designed for models of OF 1.96 N {200 gf} or greater).
Simulated Leaf Spring of Peripheral Components
VAL 12
| Operating characteristics | In the case of V-15-1A5 |
|---|---|
| Operating Force OF Max. Releasing Force RF Min. | 2.26 N {230 gf} 0.49 N {50 gf} |
| Overtravel OT Min. Movement Differential MD Max. | 0.8 mm 0.4 mm |
| Free Position FP Max. Operating Position OP | 22.9 mm 20.5 mm ± 0.8 mm |
Note. Pin plunger (Designed for models of OF 1.96 N {200 gf} or greater).
Roller Leaf Spring of Peripheral Components
VAL 2
VAL 02
| Operating characteristics | In the case of V-15-1A5 |
|---|---|
| Operating Force OF Max. Releasing Force RF Min. | 2.26 N {230 gf} 0.49 N {50 gf} |
| Overtravel OT Min. Movement Differential MD Max. | 0.8 mm 0.4 mm |
| Free Position FP Max. Operating Position OP | 22.6 mm 20.5 mm ± 0.5 mm |
Note. Pin plunger (Designed for models of OF 1.96 N {200 gf} or greater).
Note 1. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions of Peripheral Components.
Note 2. The operating characteristics are for operation in the A direction.