CAPORI 2 Joint, KSJ1, Tapered Male Screw

CAPORI 2 Joint, KSJ1, Tapered Male Screw

The addition of an installation-check mechanism and new stepped design provides reliability and a solid connection.

· Designed with a split ring that features a larger protrusion for secure assembly to the barb grooves of the main body after tightening the cap nut.
· Pull-out strength and sealing performance have been improved.
· A side hole (check window) can be included in the main body to visually check insertion of the pipe following connection.
· Completion of nut tightening can be confirmed by examining whether the split ring is protruding from the end face of the cap nut.
· Easy to tighten. Tightening torque is reduced from 40 N·m to 25 N·m (*compared with MISUMI's nominal diameter of 13).


Japanese Only

Part Number

Configured Part Number is shown.

Part Number
Part NumberVolume DiscountDays to ShipApplicable Pipe O.D.1
Nominal of Thread Name B(Name A) Working Temperature Range
Applicable Pipe O.D. 1 (Nominal) Applicable Possible Polyethylene Pipe Details
6 Day(s) or more 10[1/2B] 1/2B(15A)-20~957PN15M kind
6 Day(s) or more 13[1/2B] 1/2B(15A)-20~9510PN15M Type · Tap Water M Type
6 Day(s) or more 17[1/2B] 1/2B(15A)-20~9513PN15M Type · Tap Water M Type
6 Day(s) or more 21.5[1/2B] 1/2B(15A)-20~9516PN10M kind
6 Day(s) or more 21.53/4B(20A)-20~9516PN10M kind
6 Day(s) or more 273/4B(20A)-20~9520PN10M kind
6 Day(s) or more 273/4B(20A)-20~9520FHCross-linked Polyethylene Tube For Heaters


  1. 1

Basic Information

Type Fitting Material C3604BD Applicable Fluid Hot / cold water
Connection Type Screw⇔Pipe Direction Connection Type - Thread, Tube Direction Tapered male thread Applicable Tube Material Polyethylene
Connection Thread Type R Maximum Operating Pressure(MPa) 1.75 Surface Treatment No
Applicable Resin Pipe Distinction PEX (Polyethylene Pipe) Use of Antifreeze Acceptable Number of Sales Unit 1

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(60) 3 7960 8499 / FAX:(60) 3 7960 7499
9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday)